Texas Instruments SLOU061A manual Important Notice

Page 2

IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.

Customers are responsible for their applications using TI components.

In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, license, warranty or endorsement thereof.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation or reproduction of this information with alteration voids all warranties provided for an associated TI product or service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.

Resale of TI’s products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.

Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www.ti.com/sc/docs/stdterms.htm

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Copyright 2001, Texas Instruments Incorporated

Image 2
Contents User’s Guide Important Notice Preface Related Documentation FromJTexas InstrumentsPage Contents Figures Introduction Design Features Power RequirementsEvaluation Module Layout Physical Considerations Shows the area 100 schematic Area 100-Single Device SoicShows the area 200 schematic Area 200-Dual Device SoicShows the area 300 schematic Area 300-Quad Device SoicArea 300 Schematic-Quad Device Soic 16 pin Maximum Power Dissipation vs Free-Air Temperature EVM Component Placement Shows component placement for the EVM boardEVM Board Layout EVM Board Layout-TopEVM Board Layout-Bottom Example Circuits Schematic Conventions Inverting AmplifierNoninverting Amplifier VREF1 +1.24 VR111R113R113Differential Amplifier Sallen-Key Low-Pass Filter Wwith Dual Supply Using Area Sallen-Key High-Pass Filter Fo foSallen-Key High-Pass Filter With Single Supply Using Area Two Operational Amplifier Instrumentation Amplifier Vout +VIN 1 2R212R220 R212R221VREF2Area Quad Operational Amplifier Instrumentation Amplifier Example Circuits Example Circuits

SLOU061A specifications

Texas Instruments SLOU061A is a comprehensive technical document that provides detailed information about one of the company's key offerings in the realm of integrated circuits. This document highlights important features, technologies, and characteristics of the specified device, ensuring users can make informed decisions during the design and implementation of their projects.

One of the main features of the Texas Instruments SLOU061A is its versatility in application. The device is designed to cater to a wide range of electronic systems, including consumer electronics, industrial equipment, and automotive applications. This versatility is further enhanced by its ability to operate in various environments, withstand extreme temperatures, and support different input/output configurations.

The SLOU061A incorporates advanced semiconductor technologies that facilitate improved performance and efficiency. The device is built on a state-of-the-art fabrication process, which not only enhances its reliability but also minimizes power consumption. This is crucial in today's market where energy efficiency is a significant concern for manufacturers and end-users alike. The integrated power management features allow for dynamic power scaling, helping to optimize energy usage in real-time.

In terms of communication interfaces, the SLOU061A supports several protocols, including I2C, SPI, and UART, thereby allowing seamless integration with various microcontrollers and processors. This compatibility ensures that designers can easily incorporate the device into existing systems or create new designs without the need for significant redesign efforts.

Another notable characteristic of the SLOU061A is its robust protection features. The device is equipped with built-in safeguards against overvoltage, overcurrent, and thermal events, ensuring longevity and reliability in application. This makes it an ideal choice for projects where durability is paramount.

Lastly, Texas Instruments' commitment to customer support is evident in the documentation provided alongside SLOU061A. The datasheets, application notes, and reference designs serve as valuable resources for engineers and developers, providing guidance and best practices for implementation.

In summary, Texas Instruments SLOU061A is a feature-rich integrated circuit that stands out for its versatility, efficiency, communicative capabilities, and robust protection features, making it an excellent choice for various electronic applications across multiple industries.