Texas Instruments manual Quick Start, ±2. Typical TPA0103 EVM Jumper Settings

Chapter 2

Quick Start

The steps in this chapter can be followed to quickly prepare the TPA0103 audio amplifier EVM for use. Using the TPA0103 with the TI Plug-N-Play Audio Amplifier Evaluation Platform is a quick and easy way to connect power, signal and control inputs, and signal outputs to the EVM using standard connectors. The audio amplifier evaluation module can also be used stand-alone by making connections directly to the module pins, and it can be wired directly into existing circuits or equipment.

The platform switch and jumper settings shown in Tables 2±1 and the TPA0103 EVM jumper settings shown in Table 2±2 are typical for the TPA0103 EVM.

Table 2±1. Typical TI Plug-N-Play Platform Jumper and Switch Settings for the TPA0103

OUTPUT MODE	JP6	JP7	JP8	S2	S3
Center Only	OFF	X	X	Note 2	U2-U4
Center or L/R	Mode	X	Hi	Note 2	U2-U4
3-Channel	OFF	X	X	Note 2	U2-U4

Notes: 1) X = Don't care, OFF = Open, ON = Closed

2)Set S2 to ON when signal conditioning board is installed in U1; set S2 to OFF when no signal conditioning board is installed.

Table 2±2. Typical TPA0103 EVM Jumper Settings

OUTPUT MODE	S1	S2	S3	S4	S5
Center Only	ON	ON	OFF	OFF	OFF
Center or L/R	ON	ON	OFF	OFF	OFF
3-Channel	ON	OFF	OFF	OFF	OFF
Note: OFF = Open, ON = Closed

Topic		Page
2.1	Precautions	. . 2±2
2.2	Quick Start List for Platform	. . 2±3
2.3	Quick Start List for Stand-Alone	. . 2±4
		2-1