Vizio E320i-A2 user manual Highlight Auto Channel Scan

Setting the Tuner Mode

If you are using a device that is connected to the RF input, such as an external antenna or cable TV connection, you must set the tuner mode.

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

3.Highlight Tuner and press OK. The Tuner Settings menu is displayed.

4.Highlight Tuner Mode, then use the Left/Right Arrow buttons to select Antenna or Cable.

5.Press the EXIT button on the remote.

5

Scanning for Channels

Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an area where different free-to-air broadcast television channels are available.

1.	From the Tuner Settings menu,	VIZIO
	highlight Auto Channel Scan.
			Channel Scan
	The auto channel scan begins.
		Channel Scan
2.	Wait until the channel scan is
		Digital Channels:		0
	100% complete. Highlight Done	Analog Channels:		19
	and press OK.	18% Complete
3.	Press the EXIT button on the		Cancel
	remote.

Press OK to finish

31