Adjusting the Advanced Picture Settings
To adjust the advanced picture settings:
5
• | Backlight Control- Select Off, DCR (Dynamic Contrast |
| Ratio), or OPC. |
• | Ambient Light Sensor - The ambient light sensor detects |
1.From the Picture menu, use the Arrow buttons on the remote to highlight More, then press OK.
2.Use the Arrow buttons on the remote to highlight Advanced Picture, then press OK.The Advanced Picture menu is displayed.
3.Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow to change the setting:
•Noise Reduction - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High.
•MPEG NR - Reduces pixellation and distortion for
.mpeg files. Select Off, Low, Medium, or High.
VIZIO |
|
Advanced Picture |
|
Noise Reduction | Low |
MPEG NR | Low |
Color Enhancement | Normal |
Adaptive Luma | Medium |
Film Mode | Auto |
Backlight Control | DCR |
Ambient Light Sensor | Medium |
the light levels in the room and automatically adjusts the |
backlight for the best picture. Select Off, Low, Medium, or |
High. This option is not available if Picture Mode is set to |
Vivid. |
4. When you have finished adjusting the Advanced Picture |
Settings, press the EXIT button on the remote. |
•Color Enhancement - Reduces oversaturation of some colors and improves flesh tones. Select Off, Normal, Rich Color, Grn/Flesh, or Grn/Blue.
•Adaptive Luma - Adjusts the average brightness of the picture to compensate for large areas of brightness. Select Off, Low, Medium, Strong, or Extend.
•Film Mode - Optimizes the picture for watching film. Select Auto or Off.
23