4
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the HSB color and 11 point white balance, turn color channels off for testing, and display color bar, flat, and ramp test patterns.
To adjust the HSB color settings:
1.From the PICTURE MODE MANAGEMENT menu, use the Arrow buttons to highlight Color Tuner, and then press OK. The Color Tuner menu is displayed.
Color Tuner
| Red | Green | Blue | Cyan | Magenta | Yellow |
|
|
|
|
|
|
|
Hue | 0 | 0 | 0 | 0 | 25 | |
|
|
|
|
|
|
|
Saturation | 5 | 0 | 0 | |||
|
|
|
|
|
|
|
Brightness | 0 | 0 | 0 | 0 | ||
|
|
|
|
|
|
|
Offset | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
|
Gain | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
|
2.Use the Arrow buttons on the remote to highlight the Hue, Saturation, Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button.
3.Use the Left/Right Arrow buttons to adjust the value. When you are finished press the OK button to save the setting.
4.When you are finished adjusting the color tuner settings, press the EXIT button.
To turn color channels off and on:
1.From the PICTURE MODE MANAGEMENT menu, use the Arrow buttons to highlight Color Tuner, and then press OK. The Color Tuner menu is displayed.
|
|
| Color Tuner |
|
|
|
| Red | Green | Blue | Cyan | Magenta | Yellow |
Hue | 0 | 0 | 0 | 0 | 25 | |
Saturation | 5 | 0 | 0 | |||
Brightness | 0 | 0 | 0 | 0 | ||
Offset | 0 | 0 | 0 |
|
|
|
Gain | 0 | 0 | 0 |
|
|
|
2.Use the Arrow buttons on the remote to highlight Red, Green, or Blue.
3.Press the OK button to turn the color channel off or on. An X appears over a color channel that has been turned off.
4.Use the Arrow buttons to highlight another color channel to turn off or on. Only two color channels can be turned off at the same time.
5.When you are finished with the color channels, press the EXIT button.
To adjust the 11 Point White Balance settings:
1.From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the 11 Point White Balance menu is displayed.
11 Point White Balance
| Gain | Red | Green | Blue |
|
|
|
|
|
|
|
| 5% | 0 | 0 | 0 |
|
|
|
|
|
|
|
2.Use the Arrow buttons on the remote to highlight the Gain and Color values you wish to adjust. Press the OK button and use the Left/Right Arrow buttons to adjust the value When you are finished press the OK button to save the setting.
3.When you are finished, press the EXIT button.
21