4
ADJUSTING THE AUDIO SETTINGS
• Lip Sync - Adjusts the synchronization between the display |
Changing the Equalizer Settings
To adjust the audio settings:
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed.
3.Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/ Right Arrow buttons to change the setting:
•TV Speakers - Turns the
VIZIO
AUDIO
TV Speakers |
|
| On |
|
|
|
|
Surround Sound |
|
| On |
|
|
|
|
Volume Leveling |
|
| On |
|
|
|
|
Balance | - | + | 0 |
|
| ||
|
|
|
|
Lip Sync | - | + | 0 |
|
| ||
|
|
|
|
Digital Audio Out |
|
| PCM |
|
|
|
|
Analog Audio Out |
| Fixed | |
|
|
|
|
Equalizer |
|
|
|
|
|
|
|
Delete Audio Mode |
|
|
|
image and the accompanying audio track. |
• Digital Audio Out - Changes the type of processing for |
digital audio out and HDMI ARC output when connected |
to a home theater audio system. Select PCM or Bitstream. |
You must select Bitstream for audio with more than two channels (3.0, 5.0, or 5.1, for example).
•Analog Audio Out - Sets the volume control properties for the RCA connector when connected to a home theater audio system. Select Variable if you are controlling the
volume with the TV’s volume controls, or select Fixed if an external audio device (sound bar or AV receiver) will control the volume.
• | Equalizer - Adjusts the boost or attenuation of different |
| frequencies using either preset or custom settings. See |
| Changing the Equalizer Settings on page 25. |
• | Delete Audio Mode - Deletes a custom audio mode |
The graphic equalizer has several
To select a
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed.
3.Use the Arrow buttons to highlight Equalizer and press OK. The Audio Mode and equalizer settings screen appears.
4.Use the Left and Right Arrow buttons to select an audio mode. The equalizer bars change to reflect the mode.
5.Press the EXIT button on the remote.
When the TV speakers are set to On, DTS signals cannot be passed through digital audio outputs.
•Surround Sound - Surround sound uses DTS TruSurround™ to deliver an immersive surround sound experience from the TV’s internal speakers. TruSurround completes the entertainment experience by providing deep, rich bass and by delivering crisp details and clear, intelligible dialog. Select On or Off.
•Volume Leveling - Volume leveling uses DTS TruVolume™ to maintain consistent volume levels during transitions between program content, AV formats, and input sources. Select On or Off. In a few cases, volume leveling may artificially suppress volume increases, making it difficult to hear dialog or flattening sudden noises. If this occurs, turn volume leveling off.
•Balance - Adjusts the loudness of the audio output from the left and right speakers.
created using the Equalizer Settings. See Deleting the |
Custom Audio Mode on page 26. |
4. When you have finished adjusting the audio settings, press |
the EXIT button on the remote. |
25