ViewSonic VS11915, CD4620 warranty Advanced Option, Gamma Selection, IR Control

Page 33

ADVANCED OPTION

INPUT RESOLUTION * : INPUT RGB3,4 only

ySelects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768.

yAUTO: Determines the resolution automatically.

y1024x768: Determines the resolution as 1024x768

y1280x768: Determines the resolution as 1280x768

y1360x768: Determines the resolution as 1360x768

yThe setting you select becomes effective when POWER is turned OFF and ON again.

BLACK LEVEL EXPANSION * : INPUT RGB1,2(HDMI INPUT MODE-HD), VIDEO<S>, VIDEO only

ySelects a level of black expansion from “OFF”, “MIDDLE” and “HIGH.”

yIn case of go under the black cut-off level, please adjust the “Black level” in moderation on OSD menu.

GAMMA SELECTION

ySelects a display gamma.

y2.2

y2.4

yS gamma

yNative

yNOTE: sRGB picture mode is standard and cannot be changed.

SCAN MODE * : INPUT DVD/HD, VIDEO<S>, VIDEO only

yChanges the display area of the image.

yOVERSCAN: Set to display area about 95%

yUNDERSCAN: Set to display area about 100%

SCAN CONVERSION * : INPUT DVD/HD, VIDEO<S>, VIDEO only

ySelects IP (Interlace to Progressive) converter function.

yPROGRESSIVE: Enable the IP function, to convert interlace signal to progressive. Normally use this setting.

yINTERLACE*: Disable the IP function.

y*NOTE: This mode is better suited for motion pictures, but it increases chance of image retention.

FILM MODE * : INPUT DVD/HD, VIDEO<S>, VIDEO only

ySelects Film mode function.

yAUTO: Enable the Film mode function. This mode is better suited for movies, which is converted 24 Frames/sec source to DVD Video. We recommend to select “PROGRESSIVE” in “SCAN CONVERSION”.

yOFF: Disable the Film mode function. This mode is better suited for Broadcasting or VCR source.

IR CONTROL

ySelects the operation mode of the wireless remote controller when multiple CD4620 monitors are connected via RS-232C.

yThe item in this menu will become effective by pressing “SET” button on the selected item.

yNORMAL: The monitor will be controlled normally by wireless remote controller.

yPRIMARY: The first CD4620 monitor of those multi-connected via RS-232C is designated as PRIMARY.

ySECONDARY: CD4620 monitors other than the first one multi-connected via RS-232C are designated as SECONDARY.

yLOCK: Disable the monitor control by infrared wireless remote controller.

yKeep pressing “DISPLAY” button during 5 sec or more, this setting will return to “NORMAL”.

ViewSonic CD4620

30

Downloaded From TV-Manual.com Manuals

Page 32 Page 34
Image 33
Page 32 Page 34
Contents ViewSonic Contents Page For U.S.A For Canada Compliance InformationCE Conformity for European Countries Following information is only for EU-member statesImportant Safety Instructions Declaration of RoHS Compliance Copyright Information Product Registration For Your RecordsProduct disposal at end of product life Safety Precautions Recommended UseErgonomics Package Contents ViewSonic CD4620 Page Wireless Remote Control Handling the remote control Operating Range for the Remote ControlSetup Procedure Adjust the screen Adjust the soundAdjust the image Recommended AdjustmentHow to Mount and Attach Options to the LCD Monitor Upright position Lay the screen face downVentilation Requirements for enclosure mounting Clamper and Screw is not supply To avoid monitor from fallingWiring Diagram ConnectionsBefore making connections Connect the LCD Monitor to a Personal Computer Connecting a Personal ComputerConnect the LCD Monitor to a Computer with a Digital Output Connecting with Digital Interface EquipmentConnect the LCD Monitor to a DVD Player Connecting a DVD Player with component outConnect the LCD Monitor to a Stereo Amplifier Connecting to a Stereo AmplifierPressing the Main Power Switch Power on and OFF ModesPressing the power button Using the remote controlUsing Power Management Power IndicatorSelecting a video source To view a video source Picture SizeAudio Source Switching Picture ModeControl Lock Mode Information OSDRemote Control Control Panel OSD On-Screen-Display ControlsScreen Picture Position ScreenAudio Audio ResetBalance TreblePIP Picture in Picture PIP ResetPIP Size PIP AudioPower Save ConfigurationConfiguration Reset Factory ResetOSD Turn OFF OFF TimerInformation OSD OSD H PositionAdvanced Option Gamma SelectionIR Control Advanced Option Reset Power on DelayTiling Date and TimeFor long life use of Public Display Image Sticking of LCD PanelRecommendations Secondary Remote control numbering functionConnection Controlling the LCD monitor via RS-232C Remote ControlHow to install stands How to remove the standsStand is not supply. Stand sold as an option accessory Features Troubleshooting Specifications Analog Input Digital Input25.0 -165.0 MHz = FAX Customer SupportViewsonic LCD Display Limited WarrantyExclusion of damages Viewsonic Display Products Mexico Limited WarrantyMerida Protocol 1 with ID Introduction DescriptionProtocol 2 without ID Version control Date Reversion Changes and additionsCommunication Setting Hardware specificationCommand Message Reference Protocol 1, with IDCommand Command TypeSet-Function format Send Command Type=s Reply Command Type=+ orNo Reply CD4620/CD4220 set-function table Reply Hex FormatPass through RCU Enabled RCUReply Command Type=r or Get-Function format Send Command Type=gGet-Function description ReplyHex FormatPC Get-function command to CD4620/CD4220 LCD Monitor Length Command Value1 Value2 Value3 00D Length Command Value1 Value2 Value3CD4620/CD4220 set command table Set-Function descriptionPass through RCU has no Length Value1 Value2 Value3 Value4 00D Byte Count 00D Bytes orderAscii Key Code HEX Remote Control Pass-through mode
Related manuals
Manual 2 pages 38.95 Kb
Top Page Image Contents