Sanyo PID-42AE1, PID-42AS1 instruction manual Menu Operation, Sound menu, Time menu, Setup menu

Page 11

GB

MENU OPERATION

GB

Picture menu

■Advanced settings

Use the 5or 6button to select Advanced settings and press the 1or 2button to enter the sub menu as follows..

DCDi (Directional Correlational Deinterlacing) is used to process moving angled edge in deinterlacing to get the smoothest and most natural image.. Press the 1or 2button on the remote control to select On or Off..

ACC/ACM (ACC: Adaptive Contrast and Color; ACM-II: Active Color Management-II) is used to select adaptive Brightness, Contrast and tone control.. Press the 1or 2button on the remote control to select suitable mode either Vivid, Cinema, Sport or Off..

CCS (Cross Color Separation) is used to remove residual chroma information from luminance signal which is the result of imperfect decoding of composite video.. Press the 1or 2button on the remote control to select either Auto, Standard or Off..

DNR (Digital Noise Reduction) is available for noise reduction.. Press the 1or 2button on the remote control to select either Auto, Low, Mid, High or Off..

MPEG NR (MPEG Noise Reduction): Removes unwanted ringing and block noise from images that have undergone MPEG or JPEG com- pression and decompression.. Press the 1or 2button on the remote control to select On or Off..

Film Mode (Inverse 3:2 pulldown): Film vs.Video-Detect film. Performed on material which underwent technologic conversion to video.. Press the

1or 2button on the remote control to select On or Off..

Sound menu

Press the MENU button and select Sound using the 5 or 6 buttons, press the 1 or 2 button to enter..

Select and adjust to obtain the best sound settings for your environ- ment using the 5or 6button to select Treble, Bass or Balance and the 1or 2button to adjust levels..

Bass Expander can also be selected using the 5or 6button and pressing the 1or 2button to select On or Off..

These settings automatically store when you exit the menu.. Press the BACK button to return to the previous menu.. Press the MENU button to exit menu operation..

Time menu

Press the MENU button and select Time using the 5or 6but- tons, press the 1or 2button to enter.. Press the BACK but- ton to return to the previous menu.. Press the MENU button to exit menu operation..

■Current Weekday

Use to set current weekday using the 1or 2button..

■Current Time

Use to set the current time using the Numeric buttons..

✐Other items in Time Menu should not be selected until Current Time has been set..

■Schedule

Use to set up to 20 separate time schedules for “Power On” or “Power Off”, select 1 ~ 20 using the 1or 2button..

■Weekday

Use to set the schedule for “Power On” or “Power Off” of any weekday from Sunday through to Saturday or Everyday using the 1or 2 button..

■Time

Use to set the schedule for “Power On” or “Power Off” of any time us- ing the Numeric buttons..

■Action

Use to set the schedule for “Power On” or “Power Off” active using the 1or 2button..

You can set Power On timer in Time menu selecting “ON” in “On Timer Function” in Installation Mode. If it is selected “OFF”, Power On display in Time menu does not functional..

■On Program

Use to select AV1, RGB, AV2, AV3, PC, DVI or Network for the schedule of “Power On” using the 1or 2button..

■Active

Use to select ON or OFF using the 1or 2button.. When set “OFF” the above items “Schedule”, “Weekday”, “Time”, “Action” or “ON Program” will be inactive.

Use NUMERIC buttons [0 ~ 9] to set On Time. (Action “Power On”

– 00:00 ~ 23:59)

✐Once On Time has been set, when the set time is reached, the monitor will leave the stand-by status and enter to the source automatically..

✐After On Time has been set, you can go on watching other pro- grams.. When the set time is reached, the monitor will automatically switch to the preset program..

✐On Program can only be selected whenAction (Power On) has been set..

✐Action (Power Off) can be set to turn the monitor into standby at a selected time

Once On Program has been set, when the set time is reached, the monitor will enter to the preset source automatically..

Use the 1or 2button to select On program, AV1, RGB, AV2, AV3, PC, DVI or Network..

Setup menu

Press the MENU button and select Setup using the 5or 6but- tons, press the 1or 2button to enter.. Press the BACK but- ton to return to the previous menu.. Press the MENU button to exit..

XGA Mode

■Menu Setup

Whenever Setup menu is accessed initially, Menu Setup will be the default selection.. Press the 1or 2button to enter the sub menu..

Downloaded From TV-Manual.com Manuals

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PID-42AE1 Table of Contents Additional for North America and Canada Safety PrecautionsInstallation and Use Important UK onlyPlease help us to conserve the environment we live ServicingServicing Important recycling informationCanadian Radio Interference Regulations Servicing GBFederal Communications Commission Notice End-User License AC Power Cord RequirementGB Servicing Installation NoticeInput selection InstallationMains Connection ConnectionsRemote control battery installation Installation GBPicture menu GB InstallationSwitching into/from standby mode Controls and Menus Menu OperationTime menu Setup menuMenu Operation Sound menuPC Adj. menu GB Menu OperationDCR Installation ModeInstallation Mode Setting ProcedureSelection of picture size OperationOperation GB PIP1 modePIP2 mode OFF mode POP modeTXT/TV Operation in Text ModeTeletext Operation Helpful hints SPECIFICATIONS/HELPFUL HintsSpecification Unit mm DimensionsDVI-D signal support timing GB PC/DVI-D/COMPONENT Signal Support Timing List GBPC signal support timing Component signal support timingRS232C Command Tables RS232C Command Tables GB N8FA/N8FD-A
Related manuals
Manual 22 pages 50.24 Kb

PID-42AE1, PID-42AS1 specifications

The Sanyo PID-42AS1 and PID-42AE1 represent a significant advance in the world of air conditioning technology. Designed to offer exceptional performance, energy efficiency, and user comfort, these models are ideal for both residential and commercial applications.

Both models feature Sanyo's advanced inverter technology, which allows for precise temperature control and energy savings. By adjusting the compressor speed according to the current cooling needs, these units maintain a consistent temperature while reducing energy consumption. Inverter technology not only enhances efficiency but also minimizes noise levels, making these units suitable for quiet environments such as bedrooms and offices.

The PID-42AS1 is recognized for its superior cooling capacity. It features a powerful compressor that delivers rapid cooling, thus ensuring a comfortable indoor environment even during the hottest days. The unit also includes a high-efficiency air filter, which captures dust and allergens, promoting cleaner air circulation throughout the space.

On the other hand, the PID-42AE1 is designed with an eco-friendly approach. It utilizes R410A refrigerant, which has a lower impact on the environment compared to traditional refrigerants. Additionally, this model is equipped with energy-saving modes that allow users to optimize the cooling performance based on their needs, further enhancing its sustainability profile.

Both models boast an intuitive remote control that simplifies operation. With features like programmable timers and multiple cooling modes, users can easily customize their experience. The sleek design of these units allows them to blend seamlessly into any interior space, while the compact dimensions make them easy to install.

In summary, the Sanyo PID-42AS1 and PID-42AE1 offer a blend of innovative technology and user-friendly features. The inverter technology provides energy efficiency and noise reduction, while the advanced cooling capabilities ensure comfort. With eco-friendly refrigerant and filters that improve air quality, these models are at the forefront of modern air conditioning solutions. Whether for home or office use, Sanyo's commitment to quality and innovation is evident in every aspect of these air conditioning units.
Top Page Image Contents