Safety Precautions, Installation and Use

SAFETY PRECAUTIONS

CAUTION: Please read and retain for your safety. This unit has been designed and manufactured to assure your personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this monitor observe the following basic rules for its installation, use and servicing..

Installation and Use

Do not allow anything to rest on the power cord.. Do not locate this LCD monitor where the

cord will be damaged by people walking on it.

Do not overload wall outlets and extension

cords as this can result in fire or electric shock.

A suitable socket outlet must be provided near to the monitor and shall be easily accessible.. Do not place this LCD monitor near any heat

sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

Do not place your LCD monitor on an unstable stand, shelf or table.. Serious injury to an individual, and damage to the LCD monitor may result if it should fall.. Your sales person can recommend an approved wall mounting kit. A special wall mounting kit is available for this model..

This LCD monitor should be operated only from the type of power source indicated on the monitor or as indicated in the Operating In- structions.. If you are not sure of the type of power supply, consult your sales person or your local power company..

For added protection it is strongly recommended that this LCD monitor has its mains supplied via an approved earth fault protection device..

WARNING: To prevent injury the LCD monitor must be securely attached to the wall in accordance with the manufacturers installation instructions..

IMPORTANT:

This product must be earthed.

This unit is not disconnected from the mains unless the mains lead is unplugged. The installer must make sure that the mains plug is easily accessible..

Do not use immediately after moving the LCD monitor from a low temperature to a high temperature environment, as this causes con- densation, which may result in fire, electric shock, or other hazards. Before cleaning, unplug the monitor from the wall socket.

Do not mount near an open flame source. Open flames must never be used near this LCD monitor..

This LCD monitor should not be built in or enclosed in any way, heat build up will reduce the life of the monitor..

This LCD monitor should have a minimum distance of 5cm away from the wall and the monitor should have 10cm distance around the top and sides..

Always mount using recommended and substantial fixtures and fit- tings..

10cm

5cm


10cm				10cm

ADDITIONAL FOR NORTH AMERICA AND CANADA:

This monitor must NOT be permanently mounted to the building structure.. It must be mounted in such a way that it can be removed using basic tools..

The power supply cord must NOT be attached to the building surface.. The power supply cord must NOT be routed through walls, ceiling, floors, or other similar openings in the building structure.

The power supply cord MUST be positioned so as to prevent physical damage..

Important: (UK only)

THIS PRODUCT MUST BE EARTHED.

This equipment is fitted with an approved mains lead and an approved non rewireable UK mains plug.. To change a fuse in this type of plug proceed as follows:

1.Remove the fuse cover and fuse..

2.Fit a new fuse which should be a BS1362 13 Amp A..S..T..A.. or BSI approved type..

3.Ensure that the fuse cover is correctly refitted.

If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug..

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 13 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 13 Amp..

Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13 Amp socket else- where..

The wires in this mains lead are coloured in accordance with the following code:

Blue Neutral

Brown Live

Green and Yellow Earth

1.The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

2.The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3.The Green and Yellow wire must be connected to the terminal which is marked with the letter “E” or coloured GREEN or

GREEN and YELLOW..

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires..

Do not attempt to bypass the safety purpose of the grounding type plug..

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UN- LESS THE MAINS LEAD IS UNPLUGGED.

THE INSTALLER MUST MAKE SURE THE MAINS LEAD IS EASILY ACCESSIBLE.

Do not cover the ventilation slot on the LCD monitor.. Heat build-up can reduce the service life of your LCD monitor, and can also be dangerous..

Do not apply liquid cleaners or aerosol cleaners directly onto the LCD monitor.. Use a damp cloth for cleaning..

Downloaded From TV-Manual.com Manuals

PID-42AE1, PID-42AS1 specifications

The Sanyo PID-42AS1 and PID-42AE1 represent a significant advance in the world of air conditioning technology. Designed to offer exceptional performance, energy efficiency, and user comfort, these models are ideal for both residential and commercial applications.

Both models feature Sanyo's advanced inverter technology, which allows for precise temperature control and energy savings. By adjusting the compressor speed according to the current cooling needs, these units maintain a consistent temperature while reducing energy consumption. Inverter technology not only enhances efficiency but also minimizes noise levels, making these units suitable for quiet environments such as bedrooms and offices.

The PID-42AS1 is recognized for its superior cooling capacity. It features a powerful compressor that delivers rapid cooling, thus ensuring a comfortable indoor environment even during the hottest days. The unit also includes a high-efficiency air filter, which captures dust and allergens, promoting cleaner air circulation throughout the space.

On the other hand, the PID-42AE1 is designed with an eco-friendly approach. It utilizes R410A refrigerant, which has a lower impact on the environment compared to traditional refrigerants. Additionally, this model is equipped with energy-saving modes that allow users to optimize the cooling performance based on their needs, further enhancing its sustainability profile.

Both models boast an intuitive remote control that simplifies operation. With features like programmable timers and multiple cooling modes, users can easily customize their experience. The sleek design of these units allows them to blend seamlessly into any interior space, while the compact dimensions make them easy to install.

In summary, the Sanyo PID-42AS1 and PID-42AE1 offer a blend of innovative technology and user-friendly features. The inverter technology provides energy efficiency and noise reduction, while the advanced cooling capabilities ensure comfort. With eco-friendly refrigerant and filters that improve air quality, these models are at the forefront of modern air conditioning solutions. Whether for home or office use, Sanyo's commitment to quality and innovation is evident in every aspect of these air conditioning units.