Sharp PN-E521, PN-E601 manual 15 E, Nschedule, Power, DAY of the Week, Input

Page 15

nSCHEDULE

You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See page 12.)

SCHEDULE

PC D-SUB

XXXX/XX/XX XXX XX:XX:XX

No. (1) POWER (2)

DAY OF THE WEEK (3) TIME(4) INPUT (5)

OK…[MENU]

1 9 2 0 x 1 0 8 0

V: 60 Hz H: 67.5 kHz

1.Press or to select the SCHEDULE number, and press .

2.Set the SCHEDULE. (See the description below.)

Press or to select items, and press or to change the setting.

3.Press MENU .

SCHEDULE becomes effective.

(1)

●: SCHEDULE effective

-: SCHEDULE not effective

(2) POWER

ON : Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the monitor in standby mode.

(3) DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE.

ONLY ONCE:

Executes the SCHEDULE once on the specified day.

Specify the day of the week to execute the SCHEDULE. EVERY WEEK:

Executes the SCHEDULE on the specified day of the week

every week. Specify the day of the week to execute the

SCHEDULE.

Periodic setting such as “Monday through Friday” is also

possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day of the week.

(4) TIME

Specifies the time to execute the SCHEDULE.

Set the time on a 24-hour basis.

(5) INPUT

Specifies the input mode at power-on. When not specifying,

the screen at the previous power-off appears.

Input modes displayed on DVI, HDMI and BNC depend on INPUT SELECT settings.

Menu Items

Caution

•Do not switch off the main power after setting the

SCHEDULE.

•Specify the correct date and time. (See page 12.)

SCHEDULE does not function unless the date and time are specified.

•Check regularly that the set date and time are correct.

•When STANDBY MODE is LOW POWER, SCHEDULE cannot be set.

TIPS

•Up to 8 SCHEDULE items can be registered.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap.

15 E

Image 15

Contents PN-E601 PN-E521 Contents Part Names NFront viewNRear view Part Names NRemote control unit Signal transmitter Power buttonInput button See Display Basic OperationMute MenuCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotNMenu screen display Menu ItemsDisplaying the menu screen NExample of operation3D-Y/C List of menu itemsMenu Items Menu PN-ZB01 optional Not attached AttachedPbyP2 POS Some items may not be displayed depending on the input modeLines PIP/PbyPMenu item details NSCREENNPICTURE NSETUP 11 ENAUDIO NENLARGE PC input Menu Items NOPTION13 E NPIP/PbyPMenu Items NDual screen display Enlarge menu, set Enlarge H/V and ENLARGE-POS H/V. See NZOOM2 Special SettingSetting procedure Menu Items NEnlargeDAY of the Week Power15 E NSCHEDULEAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 17 E Communication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connection19 E NCommunication intervalNID numbers VOLM0020 ← Example IDLK0002002 VOLM003021 E Setting of the Gamma user dataCommand Command field See Direction RS-232C command tablePower control/Input mode selection How to read the command table23 E Controlling the Monitor with a PC RS-232C Picture menuAudio menu Controlling the Monitor with a PC RS-232C Setup menu Controlling the Monitor with a PC RS-232C Option menu 25 EHorizontal orientation Vertical orientation Image Position Epos settingInitialization/Functional Restriction Setting Function menu 27 EControlling the Monitor with a PC RS-232C PIP/PbyP menu Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 29 EThis monitor is factory preset as shown below IP Address Default Gateway 0.0Controlling the Monitor with a PC LAN To set from a PC Basic operation 31 EControlling with a PC Controlling the Monitor with a PC LANScreen See Setup SeeInformation about this monitor appears Monitor’s menuAccept IP Address User Name / Password33 E DNS ServerMonitor Name Installation Information NAME/LOCATIONAuthentication Account Name / PasswordConfirmation 35 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap When Authentication Fails37 E TroubleshootingPN-E601E521 G EN10B3

Related manuals

Manual 40 pages 63.27 Kb

PN-E601, PN-E521 specifications

The Sharp PNE601P and PN-E601 display models, along with the TINSE1145MPZZ(1) and PN-E521, represent a leading edge in commercial display technology, catering to businesses and institutions that require high-performance visual solutions. These displays are designed to deliver exceptional image quality, impressive durability, and advanced connectivity options, making them suitable for a range of applications, from corporate environments to public signage.

Starting with the Sharp PNE601P and PN-E601, both models are part of Sharp’s professional display lineup that emphasizes vibrant, accurate color reproduction and excellent brightness levels. They utilize advanced LCD technology, ensuring that images remain crisp and clear even in well-lit environments. With a full HD resolution, these displays provide immersive visuals that enhance any presentation or advertising content.

The TINSE1145MPZZ(1) offers unique features, including enhanced energy efficiency and a slim design that allows for seamless integration into various settings. Its lightweight construction facilitates easy installation and mounting, which can be particularly beneficial for businesses pressing for rapid deployment.

For the PN-E521 model, its standout characteristics include a robust design tailored for extended use, making it ideal for environments such as retail spaces, conference rooms, and control centers. The PN-E521 offers a wide range of input options, including HDMI, DisplayPort, and VGA, ensuring compatibility with multiple devices and setups.

All these models are equipped with advanced connectivity features, enabling cascading displays for larger installations. The incorporation of network control allows for remote management and monitoring, providing users with the flexibility to manage settings and content efficiently.

The integrated cooling system ensures that these displays maintain optimal performance while preventing overheating during intense usage periods. Furthermore, their durable construction ensures resistance to scratches and damage, extending the lifespan of the displays and reducing maintenance costs.

The Sharp PNE601P, PN-E601, TINSE1145MPZZ(1), and PN-E521 collectively enhance the visual experience, making them valuable tools for communication and marketing in technology-driven environments. Whether used for digital signage, information dissemination, or engaging presentations, these displays exemplify the pinnacle of display technology.