Sharp PN-T322B operation manual Preparing the Remote Control Unit, Changing the battery

Page 14

Preparing the Remote Control Unit

Batteries and an insulation sheet are preinstalled in the remote control at the factory. Before using the remote control, be sure to remove the insulation sheet.

Insulation sheet

Pull out

Changing the battery

1.Pull out the battery case.

Press the catch on the battery case while pulling out the case.

Remote control operation range

The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor.

Remote control

sensor

Catch

Battery case

 

2.Insert the battery.

Make sure the polarities (+ and -) of the battery are oriented correctly.

Lithium battery (CR2025)

10°

10°10°

10°

TIPS

16.4 feet (5 m)

3.Insert the battery case into the remote control.

Insert until you hear a click.

TIPS

Do not use a battery other than a CR2025 battery.

The preinstalled batteries in the remote control were installed at the factory, and therefore may become depleted before the specified usage time is reached.

When the batteries become exhausted, replace them with new (commercially available) batteries.

If you will not be using the remote control for a long time, remove the batteries.

Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

Do not sit with the remote control in your pants pocket. This may break the remote control.

Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

Objects between the remote control unit and the remote control sensor may prevent proper operation.

Replace the batteries when they run low as this may shorten the remote control’s operation range.

If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

E12

Image 14
Contents PN-T322B A. only Important Information Dear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in horizontal orientation For the monitor in vertical orientationSystem Requirements ContentsSupplied Components Part Names NFront view NRear viewPart Names NRemote control unit Signal transmitterConnecting Peripheral Equipment USB flash drive connectionConnecting the Power Cord 11 E Setting the USB flash drive coverBinding Cables Insert the USB flash drive into the USB portRemote control operation range Preparing the Remote Control UnitChanging the battery Turning power on/off Turning Power On/OffTurning on the main power Disabling power on/off operationsTouch Action Touch Action 15 EOther functions Mute Basic OperationMenu DisplayWide Zoom Normal Basic Operation NSwitching the screen size17 E Dot by DotAuto playback of image and audio files Slideshow Basic OperationDisplaying the menu screen Menu Items19 E NExample of operationNSCREEN D-SUB input Menu item detailsMenu Items NPICTURE21 E List screenNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment Opening the adjustment pattern23 E Controlling the Monitor with a PC RS-232C Communication procedure PC connectionNCommand format Communication conditionsIf execution of the command is taking some time When a command has been executed correctlyWhen a command has not been executed 25 ERS-232C command table 27 E Controlling the Monitor with a PC RS-232C OthersTroubleshooting 29 E SpecificationsNProduct Specifications NDDC plug and play Specifications NDimensional DrawingsNPower management Specifications NCompatible signal timing PC 31 ENPC D-sub input terminal pins Specifications NCompatible signal timing AVNPC/AV DVI-D input terminal pins NPC/AV Hdmi input terminal pinsPN-T322B M EN11D1
Related manuals
Manual 2 pages 17.46 Kb

PN-T322B specifications

The Sharp PN-T322B is a state-of-the-art 32-inch professional display designed to enhance business presentations, retail environments, and collaborative spaces. This model incorporates advanced technologies that ensure superior image quality, vibrant colors, and outstanding performance.

One of the standout features of the PN-T322B is its high-resolution display. With a Full HD resolution of 1920 x 1080 pixels, it delivers sharp and detailed visuals that are essential for any professional setting. This clarity makes the display suitable for a variety of applications, from digital signage to interactive kiosks.

The PN-T322B utilizes LED backlighting technology, which not only enhances brightness but also ensures energy efficiency. This is particularly beneficial in environments where displays are required to operate for extended periods. The display supports a wide color gamut, providing richer and more accurate colors that can capture the attention of any audience.

Another significant characteristic of the Sharp PN-T322B is its versatility in connectivity. It comes equipped with multiple input options, including HDMI, VGA, and DisplayPort, allowing seamless integration with various devices such as computers, multimedia players, and video conferencing systems. This flexibility makes it an ideal choice for environments where different equipment is in constant use.

The Sharp PN-T322B is designed for easy installation and maintenance, featuring a slim profile that enables wall mounting or desktop placement. Its durable construction and professional design make it suitable for high-traffic areas. Additionally, the display includes a built-in USB media player, which simplifies the process of displaying images and videos without the need for a separate media player.

One of the key advantages of the PN-T322B is its interactive touch capability. It supports up to ten points of multi-touch interaction, allowing multiple users to engage with the content simultaneously. This feature is particularly valuable in collaborative settings, where teamwork and interactivity are essential.

Overall, the Sharp PN-T322B combines innovative technology and practical features to create a powerful display solution for professional use. Whether for business presentations, educational purposes, or retail displays, the PN-T322B stands out with its excellent imaging capabilities, robust connectivity options, and user-friendly design, making it a top choice for professionals seeking a reliable and impactful visual display.