Sharp PN-T322B For the monitor in horizontal orientation, For the monitor in vertical orientation

Page 7

MOUNTING PRECAUTIONS

This product is for use indoors.

A mounting bracket compliant with VESA specifications is required.

Consult your dealer before installing, removing or moving the monitor.

Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or mishandling.

When moving the monitor, grasp both corners at the bottom of monitor. Do not grasp the screen or sensor. This may cause product damage, failure, or injury.

Use the monitor in a state that is perpendicular to the horizontal plane. If you tilt the monitor, do not tilt upward more than 45° or downward more than 20°.

If tilted upward 20° or more, set “BRIGHT” to “20” or less to prevent internal temperature abnormalities.

This monitor should be used at an ambient temperature between 41°F (5°C) and 95°F (35°C). Provide enough space around the monitor to prevent heat from accumulating inside.

For the monitor in horizontal orientation

 

Unit: inch [cm]

7-7/8 [20]*

1-7/16 [3.5]

2

2

[5]

[5]

2 [5]

 

For the monitor in vertical orientation

Adhere to the following when installing the monitor in its vertical orientation. Failing to adhere to the following may cause malfunctions.

-Install the monitor such that the power LED is located on the bottom side.

-Mount so that the mark on the back points up.

-Set the THERMAL SENSOR SETTING in the SETUP menu to PORTRAIT. (See page 21.)

Use the supplied vertical sticker when you install the monitor in vertical orientation.

Operation panel

Logo

-Be careful not to cover the remote control sensor or buttons.

Mounting precautions

(for SHARP dealers and service engineers)

• Be sure to use a wall-mount bracket designed or

 

7-7/8 [20]*

2

2

[5]

[5]

 

2 [5]

Unit: inch [cm] 1-13/16 [4.5]

designated for mounting the monitor.

• To attach a VESA-compliant mounting bracket, use M6

screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm)

longer than the thickness of the mounting bracket.

• This monitor is designed to be installed on a concrete wall

or pillar. Reinforced work might be necessary for some

materials such as plaster / thin plastic board / wood before

starting installation.

This monitor and bracket must be installed on a wall which

can endure at least 4 times or more the weight of the

monitor. Install by the most suitable method for the material

and the structure.

*If the monitor will be tilted, maintain a clearance of 15-3/4 inch (40 cm).

If it is difficult to provide sufficient space because the monitor is used inside a housing or otherwise, or if the ambient temperature is above the range 41°F (5°C) to 95°F (35°C), install a fan or take other measures to keep the ambient temperature within the required range.

Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments.

Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction.

Do not place the monitor on a device which generates heat.

Do not use the product in locations where the unit is exposed to direct sunlight or other strong light. Since this product operates with infrared rays, such light may cause a malfunction.

After mounting, please carefully ensure the monitor is

 

secure, and not able to come loose from the wall or mount.

Do not use any screw holes other than VESA holes for

 

installation.

5 E

Image 7
Contents PN-T322B A. only Important Information Dear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in vertical orientation For the monitor in horizontal orientationSupplied Components ContentsSystem Requirements NFront view NRear view Part NamesSignal transmitter Part Names NRemote control unitUSB flash drive connection Connecting Peripheral EquipmentConnecting the Power Cord Insert the USB flash drive into the USB port Setting the USB flash drive coverBinding Cables 11 EChanging the battery Preparing the Remote Control UnitRemote control operation range Disabling power on/off operations Turning Power On/OffTurning on the main power Turning power on/offTouch Action Other functions 15 ETouch Action Display Basic OperationMenu MuteDot by Dot Basic Operation NSwitching the screen size17 E Wide Zoom NormalBasic Operation Auto playback of image and audio files SlideshowNExample of operation Menu Items19 E Displaying the menu screenNPICTURE Menu item detailsMenu Items NSCREEN D-SUB inputList screen 21 EOpening the adjustment pattern Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustment23 E Communication conditions Communication procedure PC connectionNCommand format Controlling the Monitor with a PC RS-232C25 E When a command has been executed correctlyWhen a command has not been executed If execution of the command is taking some timeRS-232C command table Controlling the Monitor with a PC RS-232C Others 27 ETroubleshooting NProduct Specifications Specifications29 E NPower management Specifications NDimensional DrawingsNDDC plug and play 31 E Specifications NCompatible signal timing PCNPC/AV Hdmi input terminal pins Specifications NCompatible signal timing AVNPC/AV DVI-D input terminal pins NPC D-sub input terminal pinsPN-T322B M EN11D1
Related manuals
Manual 2 pages 17.46 Kb

PN-T322B specifications

The Sharp PN-T322B is a state-of-the-art 32-inch professional display designed to enhance business presentations, retail environments, and collaborative spaces. This model incorporates advanced technologies that ensure superior image quality, vibrant colors, and outstanding performance.

One of the standout features of the PN-T322B is its high-resolution display. With a Full HD resolution of 1920 x 1080 pixels, it delivers sharp and detailed visuals that are essential for any professional setting. This clarity makes the display suitable for a variety of applications, from digital signage to interactive kiosks.

The PN-T322B utilizes LED backlighting technology, which not only enhances brightness but also ensures energy efficiency. This is particularly beneficial in environments where displays are required to operate for extended periods. The display supports a wide color gamut, providing richer and more accurate colors that can capture the attention of any audience.

Another significant characteristic of the Sharp PN-T322B is its versatility in connectivity. It comes equipped with multiple input options, including HDMI, VGA, and DisplayPort, allowing seamless integration with various devices such as computers, multimedia players, and video conferencing systems. This flexibility makes it an ideal choice for environments where different equipment is in constant use.

The Sharp PN-T322B is designed for easy installation and maintenance, featuring a slim profile that enables wall mounting or desktop placement. Its durable construction and professional design make it suitable for high-traffic areas. Additionally, the display includes a built-in USB media player, which simplifies the process of displaying images and videos without the need for a separate media player.

One of the key advantages of the PN-T322B is its interactive touch capability. It supports up to ten points of multi-touch interaction, allowing multiple users to engage with the content simultaneously. This feature is particularly valuable in collaborative settings, where teamwork and interactivity are essential.

Overall, the Sharp PN-T322B combines innovative technology and practical features to create a powerful display solution for professional use. Whether for business presentations, educational purposes, or retail displays, the PN-T322B stands out with its excellent imaging capabilities, robust connectivity options, and user-friendly design, making it a top choice for professionals seeking a reliable and impactful visual display.