Sharp PN-U553 installation manual Connections

Connections

Caution

•Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected.

•Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems.

1

Power cord (Supplied)

For power outlet

TIPS

										1.	AC input terminal
										2.	RS-232C output terminal
										3.	RS-232C input terminal
										4.	LAN terminal
										5.	HDMI input terminal
										6.	DisplayPort input terminal
									13	7.	DVI-D input terminal
										8.	DVI-D output terminal
									14	9.	D-sub input terminal
										10. Audio1 input terminal
										11. Component input terminals
										12. Video input terminal
										13. Audio output terminals
										14. Audio2 input terminals
2	3	4	5	6	7	8	9	10	11	12

•Set the audio input terminal used for each input mode in AUDIO SELECT on the SETUP menu. The factory settings are shown below.

Input mode	Audio input terminal (Factory setting)
DVI-D, D-SUB	Audio1 input terminal
DisplayPort	DisplayPort input terminal
HDMI	HDMI input terminal
COMPONENT, VIDEO	Audio2 input terminals

•The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

•DisplayPort is a registered trademark of Video Electronics Standards Association.

E6