Sanyo DC-DAB03 To preset DAB stations, About DAB radio what to do if, Automatic presetting

Signal Error Rate: Indicates signal quality. 0 - 15: good;

16 - 30: Acceptable;

Over 30: Poor.

3. Press the f or e button to select the channel number to be preset.

Note:

-	Press the f or e button repeatedly to scroll the user through the
	available menu option (under setup menu), service station lists.	-	In this example, station “Plant Rock” is preseted in channel number 4.
	while in the service scrolling state, press the SELECT/PTY CHECK/	4.	Press and hold the MEMORY button for 2 seconds till “Preset X saved”
	RANDOM button (or the RANDOM/SELECT button on the remote		appears. (X –– 1~10, means the channel number you have preset in
	control) to select the requested service. If there is no input after 7		step 3).
	seconds, return to original display.
-	In normal display mode, press the f or e button will cause the
	display scroll through the service list.

w scroll over

-If the displayed service is one of the first 10 services on the list and it is in favourite order, as indicated by “ ”.

“ ” appears

-If the service has been saved to preset button, then it is indicated by the preset number 1, 2, etc.

preset number

-If the service is not active (e.g. it is invalid), it is indicated by “?”.

-If the service is a primary service and it has secondary services then it is indicated by “>>”, and if the service is as secondary then it is indicated by “<<”.

Current station is stored to the desired channel number.

Note:

Using the remote control, you can press the number buttons directly. Example:

To select No.3, press and hold the 3 button until “Preset 3 saved” appears. To select No.10, press and hold the 0 button until “Preset 10 saved” appears.

Listening to preset stations

1.Press the FUNCTION button to select DAB function.

2.Press the MEMORY button.

3.Press the f or e button to select the preset number.

4.Press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/ SELECT button on the remote control) to confirm the station.

To preset DAB stations

Up to 10 station can be preset.

Automatic presetting

Automatic programming will start from preset 1. It allows you to save your favorite stations as presets.

1.Sort the list of available stations by Fav station order (as “Sorting Stations” in the previous page shows).

2.Press f or e button briefly, until “ v PRESETS” appears then press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/SELECT button on the remote control).

-All the favorite stations are stored in the preset locations starting from preset number 1, overwriting the presets in the respective locations.

Manual presetting

1.Tune in the DAB station to be preset.

2.Press the MEMORY button.

Note:

Using the remote control, you can press the number buttons directly. Example:

To select No.3, press the 3 button for less than 2 seconds. To select No.10, press the 0 button for less than 2 seconds.

About DAB radio what to do if ...

In the DAB radio mode if the operation of the unit or display is not normal,

1.Press and hold the SET UP/RDS MODE button (or the SET UP/ REPEAT button on the remote control) till “press SELECT to confirm reset...” appears.

2.Press the SELECT/PTY CHECK/RANDOM button (or the RANDOM/ SELECT button on the remote control).

3.Resume the operation.

-10-