Analogue settings

Programme setup (Continued)

The item position of services can be sorted

1 Press a/b to select the service whose item position you want to move, and then press B.

DTV	005	Maori Television

DTV	022	Parliament TV

DTV	100	Freeview I HD

2 Press a/b to move it to the desired position, and then press ENTER.

DTV	100	Freeview I HD

DTV	022	Parliament TV


DTV	005	Maori Television

3 Repeat steps 1 and 2 until all desired service items are sorted.

H Auto search (Analogue)

You can also automatically search by performing the procedure below. This is the same function as programme auto search in auto installation.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Setup”.
3	Press a/b to select “Analogue programme
	setup”, and then press ENTER.
4	If you have already set the password, enter it
	here.
	• See page 12 for setting a password.
5


	Press a/b to select “Auto search”, and then
	press ENTER.
6	Press c/d to select “Yes”, and then press
	ENTER.
	Press a/b to select the desired sound
	system, and then press ENTER.

You do not need to do anything during the auto search. Press MENU to exit.

H Manual adjust (Analogue)

You can set some channel item manually.

1	Repeat steps 1 to 4 in Auto search.
2	Press a/b to select “Manual adjust”, and
	then press ENTER.
3	Press c/d to select “Yes”, and then press
	ENTER.
4	Press a/b/c/d to select the channel you
	want to edit, and then press ENTER.

• The selected channel information displays.

5	Press a/b to select the desired menu, and
	then press ENTER.
6	Press a/b or c/d to select the desired item
	or adjust the item to the desired level. Press

ENTER if necessary.

The next channel will be search in order.

Fine

You can adjust the frequency to your desired position.

NOTE

•Adjust while checking the background picture as a reference.

•Instead of pressing c/d to adjust the frequency, you can set by directly entering the frequency number of the channel with 0 — 9.

•179.25 MHz: Press 1 s 7 s 9 s 2 s 5.

•49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.

Colour system

Select the optimum colour system to receive. (Auto, PAL, SECAM, NTSC 4.43, PAL-60)

Sound system (Broadcasting system)

Select the optimum sound system (Broadcasting system) to receive. (B/G, D/K, I)

Label

To enter the name of the channel. Maximum 5 alphanumeric can be input.

•Press a/b/c/d: To select a desired alphanumeric, and then press ENTER.

Repeat until the name is fully spelt out.

Search			Broadcasting station name settings
Fine
Fine
Colour system [	Auto	]
Colour system [	Auto	]
Sound system [	B/G	]	A B C D E F G H I J	CLEAR

Label	[	]	KLMNOPQRST	BACK
			KLMNOPQRST	BACK
Booster	[ Off ]		U V W X Y Z + – . _
			U V W X Y Z + – . _
Skip	[ Off ]		0 1 2 3 4 5 6 7 8 9	END
Lock	[ Off ]		0 1 2 3 4 5 6 7 8 9	END
Lock	[ Off ]

•To exit, select END and then press ENTER.

•If the wrong alphanumeric is entered, select CLEAR to clear, and then press ENTER.

Booster

Enhance the picture quality during weak signal. It is not recommended to turn on during strong signal condition. It may induced unwanted noise. (On, Off)

Skip

Channels with “Skip” set to “On” are passed over when using CHr/seven if selected while watching the image from the TV.

Lock

You can block the viewing of any channel.

NOTE

•See “Child lock” for setting a password.

•If “Lock” is set to “On” for a channel, “Child lock has been activated” is displayed when you select the channel, and the image and sound of the channel is blocked.

•When pressing ENTER while “Child lock has been activated” is displayed, password input menu will be displayed. Inputting the correct password lifts the child lock temporarily until the power is turned off.