Sharp LC-32L400X operation manual Option menu

H 4:3 mode

The WSS signal has 4:3 auto-switching that allows you to select between Panorama and Normal.

Selected item		Description
Panorama	Wide image without side bars
Normal	Normal range keeping 4:3 or 16:9 aspect
	ratio
	WSS signal 4:3 screen
4:3 mode “Panorama”		4:3 mode “Normal”

H Quick start

You can reduce the TV’s start-up time after turning on the power with the remote control unit.

Selected item	Description
On	The TV quickly starts up from standby,
	8.5W or more of power consumption is
	required during standby.
Off	Power consumption is less than 1W.

H Text language

Select from among 3 kinds of language: West Europe, Arabic, Farsi.

NOTE

•Teletext can display only when it is sent by a network. Not used to convert between languages.

HIdentification

You can check the current version of the software on the screen.

HReset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

NOTE

•If you execute “Reset”, all the settings such as Picture, Audio and Programme will be reset to the factory preset values.

14

Option menu

Option	Digital setup
Input select
PC audio select	[HDMI1]
Auto volume	[On]
Digital audio output	[PCM]
Audio only
4 Game play time
4 Colour system
4 Fine sync.
Version up

H Input select

For setting the signal type of external equipment.

Input source	Selectable item
INPUT2	Auto, S-VIDEO, VIDEO

H PC audio select

When using the INPUT5 terminal or HDMI1 terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue audio input.

Selected item	Description
HDMI1	When connecting devices (including a
	PC) with DVI/HDMI cable to the INPUT1
	terminal and inputting analogue audio
	signals from the AUDIO (R/L) jack.
INPUT5 (RGB)	When connecting a PC to the INPUT5
	terminal, and inputting analogue audio
	signals from the AUDIO (R/L) jack.

NOTE

•You must set this to “INPUT5(RGB)” when connecting devices (including a PC) with an HDMI-certified cable to the INPUT 1 terminal. If “HDMI1” is set, there will be no sound output.

H Auto volume

Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. Auto volume solves this problem and equalises the volume levels. (On, Off)

H Digital audio output

This function allows you to select your favourite audio output system.

Selected item	Description
PCM	The optical output format is normally in
	PCM.
Dolby Digital	Dolby Digital audio will be output when
	there is a Dolby Digital audio signal.
	The output will be in PCM when there
	is no Dolby Digital audio signal.