LG Electronics E2040S, E2240T Auto Button, Input Button, Power Indicator, Auto Image Adjustment

Control Panel Functions

AUTO Button	AUTO IMAGE ADJUSTMENT
	When adjusting your display settings, always press
	the AUTO button before entering the On Screen
	Display(OSD). (Only Analog Mode)
	This will automatically adjust your display image to
	the ideal settings for the current screen resolution
	size (display mode).
	The best display mode is
	E1940T : 1360 x 768
	E2040T : 1600 x 900
	E2240T/E2340T : 1920 x1080

INPUT Button

(SOURCE Hot key)

When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub.

EXIT Button Exit the OSD(On Screen Display).

Power Button & Use this button to turn the display on or off.

Power Indicator

The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking white.

11