Connecting the Display | E1940S/E2040S/E2240S/E2340S |
|
|
Connecting with the PC
1. | Before setting up the monitor, ensure that the power to the monitor, the computer |
2. | system, and other attached devices is turned off. |
Connect signal input cable 1 and power cord 2 in order, then tighten the screw |
of the signal cable.
AConnect D-sub(Analog signal) Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
When using a
Macintosh
Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row)
Varies according to model.
A
3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.
Power Button
NOTE
‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.
9