8ASSEMBLING AND PREPARING
ENGLISH
Using the Kensington security system
The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the Monitor set and a table.
NOTE
The Kensington security system is optional. You can obtain it from most electronics stores.
WARNING
•When adjusting the angle of the screen, do not put your
finger(s) in between the head of the monitor and the stand body. You can hurt your 
finger(s).
•When adjusting the height of the screen, do not put
your finger(s) in between the head of the monitor and the stand base. You can hurt your finger(s).
WARNING
•You do not need to replace the Locking pin after it is removed,to adjust its height.
ERGONOMIC
•It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.