Autosound at its Best

Thank you for purchasing JBL's Grand Touring Series multi-element automotive loudspeakers. We’ve organized this manual to make your

Installation of the GTO402 speakers as shown in Figures 1a and 1b.

Figure 1a

Removable Mounting Ears on

GTO 402, 422

Bend up and down repeatedly to break off or use tin snips.

•Some Toyota installations may require mounting ears to be removed from opposite sides.

•Some European car installations may require all four ears to be removed.

Typical installation of the GTO962, 803, 963, 502, and 402 speakers with grilles as shown in Figure 2.

installation as simple and trouble-free as possible. Please read through it com- pletely before proceeding. If, after having read it, you decide that you would rather leave installation to a professional, consult your JBL Grand Touring Dealer.

Your JBL GT Series multi-element speakers are built to meet the same rigorous standards of construction and performance that have long established JBL’s renowned home and professional speakers.

These speakers incorporate advanced materials and construction especially suited to the unique acoustic environ- ment of modern vehicles. They are engineered to provide excellent disper- sion, wide frequency response, and high power handling.

Mounting Ears Removed

Figure 1b

Two-Screw Mounting Configuration

Trim Ring

Figure 2

Car Door

Grille

Screen

Note: The GTO462, 462d, 572, 573, 4102, and 302 are designed for direct replacement of factory speakers. Therefore they do not contain the grilles and trim ring shown in Figure 2.

Installation of these models simply entails reversing the steps taken to remove the original speakers.