|
| JHD905 | |
Troubleshooting |
|
| |
|
|
|
|
Problem | Cause | Corrective Action |
|
No power. | Vehicle ignition switch is not on | If the power supply is connected to |
|
|
| the vehicle accessory circuits but |
|
|
| the engine is not moving, switch the |
|
|
| ignition key to “ACC” |
|
|
|
|
|
| The 3A fuse is blown | Replace the 3A fuse |
|
No reception | Volume turned down too low | Adjust volume until sound is heard |
|
| Wiring not connected properly | Check wiring connections |
|
Radio does not work | Antenna cable not connected | Insert antenna cable firmly |
|
Volume too high or too | Preset volume is set incorrectly | Use the Menu adjustment (page 7) |
|
low when the radio is |
| to change preset volume to desired |
|
turned on |
| level |
|
|
|
|
|
LCD display is dark and | Radio too hot | Turn radio off and allow to cool |
|
difficult to read |
| down |
|
|
|
|
|
No WB function | Programmed to “European” | Program to “USA” (setup menu) |
|
Weather alert does not | Weather alert programmed to | Program to “on” (setup menu) |
|
function | “off” |
|
|
|
|
|
|
NOTE: Proper care and cleaning is essential to optimal operation. The JHD905 may be cleaned with mild detergent/water mixture and a soft cloth to remove grease and grime. Do not pressure wash directly on the radio.
10