JHD905 Installation, Mounting the Bracket

JHD905

Installation

Mounting the Bracket

Two options are provided for mounting the bracket (self-tapping screws or machine screws with nuts) to ensure a mounting option ideal for your mounting location. Avoid obstructing airflow to the rear cooling fins on the radio.

NOTE: Mounting holes should be drilled to 7/32”. Before drilling the mounting holes, make sure the area behind the panel where the holes are desired is clear of wires and fuel, vacuum and or brake lines.

Self-Tapping	Machine Screws
Screws	with Nuts
(Hole size 7/32")	(Hole size 7/32")
	(Hole size 7/32")

Mounting Stack

Mounting machine screw

Bracket metal

Vehicle mounting surface

Washer

Nut

Attaching the Radio

Once the bracket is securely mounted, use the four included M4 machine screws to fasten the bracket to the back of the radio. Alternately, the radio can be mounted directly to the instrument panel if access to the rear of the instrument panel is available.

CAUTION! Do not over tighten the 4 mounting screws. Hand tighten only.

Regular

Mounting

Overhead

Mounting