Jensen JRV210 operation manual Troubleshooting, Symptom Cause Solution

JRV210

TROUBLESHOOTING

Symptom	Cause	Solution
No power	The vehicle’s ignition is not	If the power supply is properly
	on	connected to the vehicle acces-
		sory terminal, switch the ignition
		key to “ACC”.
	The fuse is blown	Replace the fuse.
Disc cannot be loaded or	Presence of CD disc inside	Remove the disc in the player
ejected	the player	and insert the new one.
	Inserting the disc in reverse	Insert the compact disc with the
	direction	label facing upward.
	Compact disc is extremely	Clean the disc or try to play a new
	dirty or disc is defective	one.
	Temperature inside the	Wait until the ambient tempera-
	vehicle is too high	ture returns to normal.
	Condensation	Leave the player off for an hour or
		so, then try again.
No sound	Volume is too low	Adjust volume to audible level.
	Fader is set incorrectly	Press AUDIO button to access
		menu and adjust Fader settings.
	Wiring is not properly con-	Check wiring connections.
	nected.
The operation keys do	The built-in microcomputer	Press the RESET button.
not work	is not operating properly
	due to noise
Sound skips	The installation angle is	Adjust the installation angle to
	more than 30 degrees.	less than 30 degrees.
	The disc is dirty or defec-	Clean the disc and try to play
	tive.	again or use new disc.
Cannot tune to radio sta-	The antenna cable is not	Insert the antenna cable firmly.
tion, auto-seek does not	connected.
work
	The signals are too weak.	Select a station manually.
Radio automatically	This is a normal function. A	If you do not want this to occur,
switches to WB (Weather	Weather Band warning is	set the WB Alert setting to “OFF”
Band)	being received.	in the System menu.
Radio automatically turns	This is a normal function	If you do not want this to occur,
on (ignition on) and tunes	when the Alert Pwr feature	set the Alert Pwr setting to “OFF”
to WB (Weather Band)	is set to “AUTO” in the sys-	in the System menu.
	tem menu. A Weather Band
	warning is being received.

18