Jensen CD6112 instruction manual Operation, Power, Source, Audio Mute, Volume / Audio Control

Page 10

OPERATION

Power

Press the power button (2) to turn the unit on. Press and hold the power button again to turn the unit off.

NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range.

Source

Press the SRC button (6) to select a different mode of operation, as indicated on the display panel. Available modes include tuner (FM1, FM2, FM3, AM1, AM2), CD, and auxiliary (AUX). CD mode appears in the menu only if a CD is present in the CD player.

Audio Mute

Press the mute button (2) to silence the audio volume. “Mute” appears on the display. Press mute again to restore volume to the previous setting.

Volume / Audio Control

To increase the volume, turn the rotary encoder (5) clockwise. To decrease the volume, turn the rotary encoder counter-clockwise. When volume is adjusted, the volume level will be shown on the display panel as a number ranging from “0” (lowest) to “46” (highest).

Press the MENU button (5) repeatedly to step through the following audio functions: volume (VOL), bass (BAS), treble (TRE), balance (BAL), fader (FAD) and back to volume. The unit automatically exits audio control mode after five seconds of inactivity.

 

VOL

 

VOL

FAD

BAS

BAL TRE

CD6112

CD6112

 

 

160

 

 

Watts

 

DX/ST

/

LOUD

PS/AS

Bass

To adjust the bass level from “-6” to “+6”, press the MENU button (5) until “BAS” appears in the display. Turn the rotary encoder clockwise to increase or counter-clockwise to decrease the bass. “0” represents a flat response.

Treble

To adjust the treble level from “-6” to “+6”, press the MENU button until “TRE” appears in the display. Turn the rotary encoder clockwise to increase or counter-clockwise to decrease the treble. “0” represents a flat response.

Balance

To adjust the balance from “12L” (full left) to ”12R” (full right), press the MENU button until “BAL” appears in the display. Turn the rotary encoder to adjust the balance between the left and right speakers. “L = R” represents a center balance.

Fader

To adjust the fader from “12F” (full front) to “12R” (full rear), press the MENU button until “FAD” appears in the display. Turn the rotary encoder to adjust the fader between the front and rear speakers. “F = R” represents a center fader level.

6

Image 10
Contents CD6112 Page Table of Contents CD6112 Chassis FeaturesIntroduction GeneralTools and Supplies InstallationUsing the Mounting Sleeve PreparationReconnect Battery Kit InstallationISO Installation FusesWiring Diagram AntennaDetaching the Front Panel Front Panel ReleaseRe-attaching the Front Panel Operation PowerVolume / Audio Control SourceLoudness Control Loud Reset ButtonEqualizer Selector Menu OperationTuner Operation CD Player Operation Replacing the Battery Remote ControlOperating Range Compact Discs Care and MaintenanceCD Player CD-R and CD-RW CapabilityTroubleshooting Specifications CD6112 Obtaining Warranty Service What is covered?What is not covered? Who is covered?¿Qué está cubierto? Radios del CD o de los Multimedia¿Quién está cubierto? ¿Qué no está cubierto?Qui est couvert ? Obtenir le service de garantieRadios CD ou Multimédia / Unités principales Ce qui est couvert ?Page