Tuner Operation

The CD6112 allows you to receive channels in U.S.A. or EUROPE mode. See “Frequency Spacing” on page 7 to learn how to change the tuner options.

CD6112
160
Watts		DX/ST
/	LOUD	PS/AS

Select a Band

Press BAND (3) to change between three FM bands and two AM bands. Each band stores up to six preset stations.

Mono/Stereo Selection

Press and hold the DX/ST button (15) to switch between monaural and stereo reception. Choose mono when a strong stereo signal cannot be

achieved (stereo mode is indicated by the icon). “MONO” or “STEREO” temporarily appears on the screen when selected.

Local/Distant Reception

When the Local function is on, only radio stations with a strong radio signal are played. Activate the Local (LOC) function by pressing the DX/ST button (15). Press DX/ST again to activate the Distant (DX) mode (indicated by the triangle with rings above it).

Tuning

Manual Tuning

Press the UP TUNING >> or DOWN TUNING << buttons (17) for more than three seconds to enter manual tuning mode, then press the Up Tuning or Down Tuning buttons to move the radio frequency number up or down one step.

CD6112

Auto Seek Tuning

Press the UP TUNING >> or DOWN TUNING << buttons (17) for less than three seconds to move to the next/previous station automatically.

Preset Stations

Up to six stations on each band can be stored as presets and can then be instantly recalled by pressing the associated preset button (12). To store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six on the face of the radio) for more than two seconds. When stored, the preset number will appear in the display. The station is now stored and can be re-called at any time by pressing the corresponding preset button. Repeat for the remaining five presets on the current band and for all presets on the other four bands.

Preview Scan / Automatically Store (PS/AS)

Preview Scan

Press PS/AS (13) to scan all strong stations in the current band. The unit will stop at each station for five seconds before continuing to the next station. Press PS/AS again to stop scanning and listen to the current station.

Automatically Store

Select six strong stations and store them in the current band using the Automatic Store feature. To enable this feature, press and hold PS/AS (13) for more than two seconds. The radio will automatically scan the band in use and enter strong stations into the preset memory positions for that band. After entering the stations into memory, the unit will automatically stop at each station for five seconds so each can be heard. When using the Automatically Store feature, the new stations replace any stations already stored in preset memory for the selected band.