Jensen VM8514 Volume Control, Steering Wheel Control SWC, Audio Menu, SWC Functions

VM8514

Volume Control

To increase the volume, turn the VOUSEUMENU (rotary encoder) (2) clockwise. To decrease the volume, turn the rotary encoder counter-clockwise. When volume is adjusted, the volume level is shown on the display panel as a number ranging from "0" (lowest) to "40" (highest).

Steering Wheel Control (SWC)

The VM8514 is compatible with the PAC (Pacific Accessory Corporation) steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled "SWC Interface") on the back of the head unit allows connectivity to the PAC adapter. Please refer to the instructions included with the PAC adapter for detailed installation information.

SWC Functions

The following controls are available for most vehicles:

1.Vol Down

2.Vol Up

3.Mute

4.Seek Down / Previous Track / ** Preset Down

5.Seek Up / Next Track / ** Preset Up

6.SRC (Source)

7.** Select

8.** Select

9.Band

**If additional steering wheel control buttons are available on the vehicle, function 7/8 may be assigned the "Select" feature. This feature / function may not be available on some vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is pressed momentarily, Preset Up is selected. If "Select" (function 7 or 8) is held down and function 5 is pressed momentarily, Preset Down is selected.

Audio Menu

Press the VOUSEUMENU button (2) to access the audio menu. Press the VOUSEUMENU button repeatedly to move through the list of menu options.

NOTE: Audio settings only apply to the current source (Source Tone Memory). You must make audio adjustments for another source when that source is active.

•Sub_w: When the Low Pass Filter is activated (see "Sub LPF (Low Pass Frequency)" on page 12). you can use the VOUSEUMENU rotary encoder to adjust the subwoofer volume from "-14" to "0".

10