Jensen VM8514 Select a Band, Tuning, Program Information, PTY Search, Preset Stations

VM8514

Select a Band

Press the BAND button (3) on the front panel or remote control (25) to change between three FM and two AM bands. Each band stores up to six preset stations.

Tuning

Seek Tuning

Press the TUNEITRACK »1 or 1« buttons (17) on the front panel or remote control (12) to seek the next/previous station automatically.

Manual Tuning

Press and hold the TUNEITRACK »1 or 1« buttons (17) on the front panel or remote control (12) to enter Manual tuning mode. Press the buttons again to move the radio frequency number up or down one step.

Program Information

To view available program information, press the PTY button (14) on the control panel. Press repeatedly to choose between Program Type (PTY) category, Program Service station call letters (PS), and Radio Text (RT).

PTY Search

To view the Program Type categories, press and hold the PTY button (14) on the control panel. Program type categories are listed at the bottom of the screen, allowing listeners to find similar programming by genre. Press the TUNEITRACK »1 or 1« buttons (17) to select a category. After a few seconds, the radio will start scanning for stations broadcasting in the selected category.

NOTE: Program information is broadcaster dependant. Not all broadcasters supply accurate information.

Preset Stations

up to six stations on each band can be stored as presets, which can then be instantly recalled by pressing the associated preset button (8-13). To store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six on the face of the radio or remote control) for more than two seconds. When stored, the preset number will appear in the display. The station is now stored and can be recalled by pressing the corresponding preset button. Repeat for the remaining five presets on the current band and for presets on the other four bands.

15