LG Electronics 27EC33V owner manual Mounting on a wall

Page 10

ASSEMBLING AND PREPARING 9

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

4VESA compatible.

5Please use VESA standard as below.

yy784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

yy787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.

Model

 

 

 

 

27EC33V

 

 

 

 

 

 

 

 

 

 

 

 

VESA (A x B)

 

100 x 100

Standard screw

 

M4

Number of screws

4

 

CAUTION

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit will include an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

ENGLISH

Image 10
Contents LED LCD Monitor Page Contents Assembling and Preparing UnpackingParts and buttons Stand Body Setting up the Monitor setAttaching the Stand Base Stand Body Stand BaseDetaching the Stand Base BodyMounting on a table Using the cable holderCable holder Front Rear Mounting on a wall 27EC33VSUB connection Using the Monitor SETConnecting to a PC DVI-D connectionYySelf Image Setting Function Yy‘AUTO’ FunctionOSD Locked Customizing SettingsMonitor set Buttons UnlockedCustomizing Settings Menu SettingsPicture Menu Next Menu PictureMenu Next Menu Color ColorColor Temp Custom Volume DisplayOthers PowerIndicator Menu Next Menu OthersMY KEY MY KEY SettingMY KEY Setting BackFUNC. Setting Picture ModeSuper Energy Saving Super Energy SavingOFF Dual Display Dual WEBMY KEY Setting Troubleshooting Check the following before calling for serviceSettings Recommend resolutionSPECIFICATIONS‌ 27EC33VPreset Modes Resolution 27EC33V IndicatorProper posture for using the Monitor set Proper PostureModel Serial