ENGLISH
20CUSTOMIZING SETTINGS
SUPER ENERGY SAVING
1Press FUNC. button on the bottom of the Monitor set to
display the FUNC. OSD.
2 Select SUPER ENERGY SAVING by pressing the ► button.
3 Enter to SUPER ENERGY SAVING by pressing the ▼ button.
4 Set the options by pressing the ◄ or ► or ▼buttons.
5Select EXIT to leave the OSD menu.To return to the
upper menu or set other menu items, use the up arrow (
) button.
Each option is explained below.
SUPER ENERGY SAVING | Description |
ON | Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function |
OFF | Disables SUPER ENERGY SAVING. |
RESET | Resets the values of total energy consumption reduction and CO2 emission reduction |
| estimates. |
NOTE
yyTOTAL POWER REDUCTION: How much power is saved while using the monitor.
yyTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. yySAVING DATA(W/h)
685 mm (27 inch)
SUPER SAVING 8 W/h
yySaving Data depends on the Panel. So,those values should be different from each panel and panel vendor.
yyLG calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087)
yySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.