STEP 11: Tuck each carpet flap underneath carpet.
Picture #8
STEP 12: Reinstall the rear factory console mounting screws to seal up the holes. These screws are no longer used to secure the console.
Picture #9
STEP 13: Run speaker wire to the front area of the Stealthbox. Set the Stealthbox in the vehicle and attach the wire to the terminal strip on the Stealthbox and test the Stealthbox for proper operation.
Picture #10
STEP 14: Position the console and Stealthbox in place in the vehicle making sure that the wires are not pinched by the Stealthbox’s feet.
Picture #11
Stealthbox | Stealthbox 2001 | Sheet SKU# 011150 | Revision 01/23/01 |