JL Audio J2250.1 Appendix b J2-250.1 Specifications General Specifications, Input Section

Appendix b:

J2-250.1 Specifications

General Specifications:

Recommended Fuse Value: 30A

Recommended Fuse Type: ANL at battery, 1x 30A ATC fuses on amplifier chassis.

Input Section:

Low-Level Input: Single-ended with RCA jacks

Low-Level Input Range: 200mV - 4V RMS

High-Level Input: Single-ended with molded connector

High-Level Input Range: 630mV - 20.5V RMS

Amplifier Section:

Amplifier Topology: Class A/B Monaural with Dual N-Channel MOSFET output stage

Power Supply: PWM switching type, unregulated Rated Power with less than 1% THD (14.4V supply): 175W RMS x 1 @ 4Ω

210W RMS x 1 @ 3Ω

250W RMS x 1 @ 2Ω

Frequency Response: 10 - 100 Hz (+/– 1 dB)

Crossover Section:

Low-Pass Filter: 12 dB/octave with continuously variable cutoff frequency selection from 60 - 240 Hz. Non-defeatable.

Preamp Outputs:

2-Channel, pass-through with unity gain, RCA-type jacks.

Bass Boost:

Single-band with 45 Hz center frequency, adjustable from 0 to +12dB.

Remote Level Control:

Via included, wired remote control knob. Full mute to 0 dB range.

Dimensions (LxWxH):

10.60" x 9.60" x 2.15" (269 mm x 244 mm x 55 mm)

Due to ongoing product development, all specifications are subject to change without notice.

13