Tweeter Installation, Flush-Mount Installation

TWEETER INSTALLATION

First, run speaker wires from the tweeter output of the crossover (see Wiring Diagram B on page 5) to the desired tweeter mounting locations, observing the same precautions as mentioned in the woofer installation section. Terminate the wires with the supplied 2.8 mm male crimpable connectors.

TWEETER FiXTURE INSTALLATION: The dome tweeters supplied with your

C3-525 system have been designed for maximum mounting versatility in a component configuration. There are two primary methods by which the tweeters can be mounted in your vehicle:

Flush-Mount Installation

The dome tweeters supplied with your

C3-525 system have been designed to integrate with your installation in a clean, unobtrusive manner using a flush-mount cup. This compact mounting fixture is installed using the method illustrated in Diagram K and requires a mounting hole with a diameter of 1.875 in. (47.6 mm).

At least 1.70-inch (43.2 mm) of clearance is required behind the mounting surface of the tweeter for the spring clips and 1-inch machine screws used in mounting the fixture. In limited depth applications, it may be necessary to cut down the length of the machine screw, or to use a shorter screw (not supplied). Hand-tighten the machine screw until the fixture is secure (See Diagram K).

Surface-Mount Installation

In this application, you will not need to cut large holes in your vehicle’s panels for the tweeters. You will only need to drill a hole for the wires and two smaller holes for the mounting screws. This application is useful when mounting the tweeters to a panel that has insufficient clearance behind it for the tweeter’s magnet structure.

Using the fixture as a template, mark the screw hole locations and a location in the center of the fixture for the wire hole. Remove the fixture and drill pilot holes for the screws and a 1/4-inch (6.4

mm)for the wires. Use the supplied #6 x 1.00-inch sheet metal screws to secure the fixture as shown in Diagram L. Next, route the tweeter’s positive (+) and negative (-) wire leads through the 1/4-inch center hole. The tweeter is secured to the fixture using a simple bayonet (twist and lock) mechanism. To attach the tweeter to the surface-mount fixture, observe the indented locking slots on the outer edge of the tweeter body and align these with the tabs visible on the inside walls of the fixture. The tweeter should slide into place easily and can then be locked by pushing down on the tweeter and giving it a small clockwise turn (See Diagram L).

12 JL Audio - C3-525 Owner’s Manual

C3-525, C3-525-020810, C3-525cw, C3-100ct, C3-525-XO specifications

JL Audio is synonymous with high-quality audio equipment, and their C3 series speakers represent a remarkable blend of performance, durability, and innovation. Among the standout models are the C3-525-XO, C3-100ct, C3-525cw, C3-525-020810, and C3-525. Each of these speakers is engineered to deliver superior sound quality, making them ideal for discerning audiophiles and casual listeners alike.

The C3-525-XO is a 5.25-inch coaxial speaker designed to reproduce a dynamic range of sound. It features a premium-grade woofer cone made of infused polypropylene, ensuring crisp mids and solid bass. The unique floating tweeter design allows for improved sound dispersion and imaging, making it suitable for a variety of installation locations.

Next in the lineup is the C3-100ct, a dedicated tweeter that enhances the high-frequency output of any audio system. With its 1-inch aluminum dome tweeter, the C3-100ct produces clean, detailed treble frequencies. It also incorporates a neodymium magnet structure, which helps in maximizing performance while minimizing weight, making it a great option for custom-fit installations.

For those seeking greater bass response, the C3-525cw is a powerful component subwoofer that excels in low-frequency reproduction. It features a robust voice coil and high excursion design, creating deep, rich bass that enhances overall sound fidelity. The C3-525cw is designed with durability in mind, with a polypropylene cone that resists damage from moisture and UV exposure.

The C3-525-020810 is a versatile option that combines the qualities of both coaxial and component speakers. It is specially designed to integrate seamlessly into various systems while providing excellent sound quality. Its shallow mounting depth allows for installation in tighter spaces without sacrificing audio performance.

Finally, the standard C3-525 offers a balanced sound profile suitable for a wide range of music genres. Equipped with JL Audio's signature technologies and materials, it ensures a robust performance with extended frequency response and minimal distortion.

Together, these models showcase JL Audio's commitment to innovative design and exceptional sound. Each speaker in the C3 series combines the latest audio technologies with meticulous engineering, promising an immersive listening experience that appeals to every music lover. Whether you are upgrading your audio system or building a new one, investing in JL Audio's C3 series will elevate your in-car or home audio experience to new heights.