Getting Started, Crossover Network Installation

GETTING STARTED

•Turn off the audio system. It is also advisable to disconnect the negative (–) terminal of your vehicle’s battery whenever performing installation work.

•Before cutting, drilling or inserting any screw, check clearances on both sides of the planned mounting surface. Also check for any potential obstacles, such as window tracks and motors, wiring harnesses, etc. Check both sides of the

vehicle, many vehicles are not symmetrical!

•Always wear protective eyewear.

CROSSOVER NETWORK INSTALLATION

The crossover networks supplied with your C3 System should be installed in a dry location inside your vehicle. DO NOT INSTALL THEM INSIDE OF A DOOR! Doors often get wet on the inside, which can damage your crossover networks and could potentially damage your entire sound system. The crossovers can be screwed into a solid surface via two holes located under the protective cover of the case. To access these holes, simply squeeze the sides of the cover while gently pulling the cover away from the base. Make sure that your mounting location will not cause damage to wiring, fuel lines, brake lines or any other vital component of your vehicle. Once you have screwed the case in and made your connections, snap the protective cover back into place.

TWEETER PROTECTION

The C3 crossover networks are equipped with an advanced electronic tweeter protection circuit designed to minimize the possibility of tweeter failure. This electronic device monitors current going to the tweeter and will disconnect the tweeter from the signal when it senses overload. Should this occur while listening to the audio system, simply reduce the volume for a few seconds and the protection circuit will reset itself automatically.

CROSSOVER NETWORK ADJUSTMENT

The crossover networks have been designed to allow tonal adjustments to the upper midrange response and tweeter level. These adjustments make it possible to fine-tune your system to suit your listening preferences and to compensate for various speaker mounting applications.

ADJUSTABLE MIDRANGE PRESENCE

Your C3 crossover networks provide a unique midrange presence control, located under the cover. The midrange presence is selectable via a set of pins and allows for three settings. These settings affect the amplitude of the upper midrange response of the C3 component woofer. We recommend that you begin your listening in the “REF” (Reference) and adjust up or down as needed to compensate for mounting location, orientation or personal taste.

ADJUSTABLE TWEETER LEVEL

C3 crossover networks also provide four levels of tweeter adjustability designed to compensate for different mounting locations, vehicle interiors and personal taste. These levels are selectable via a set of pins located under the clear cover of each crossover case. We recommend that you begin listening in the “REF” (Reference) position. To find the optimum tonal balance in your installation, experiment with alternate tweeter level settings by moving the pins. It is safe to switch jumpers while the system is playing.

4 JL Audio - C3-525 Owner’s Manual

C3-525, C3-525-020810, C3-525cw, C3-100ct, C3-525-XO specifications

JL Audio is synonymous with high-quality audio equipment, and their C3 series speakers represent a remarkable blend of performance, durability, and innovation. Among the standout models are the C3-525-XO, C3-100ct, C3-525cw, C3-525-020810, and C3-525. Each of these speakers is engineered to deliver superior sound quality, making them ideal for discerning audiophiles and casual listeners alike.

The C3-525-XO is a 5.25-inch coaxial speaker designed to reproduce a dynamic range of sound. It features a premium-grade woofer cone made of infused polypropylene, ensuring crisp mids and solid bass. The unique floating tweeter design allows for improved sound dispersion and imaging, making it suitable for a variety of installation locations.

Next in the lineup is the C3-100ct, a dedicated tweeter that enhances the high-frequency output of any audio system. With its 1-inch aluminum dome tweeter, the C3-100ct produces clean, detailed treble frequencies. It also incorporates a neodymium magnet structure, which helps in maximizing performance while minimizing weight, making it a great option for custom-fit installations.

For those seeking greater bass response, the C3-525cw is a powerful component subwoofer that excels in low-frequency reproduction. It features a robust voice coil and high excursion design, creating deep, rich bass that enhances overall sound fidelity. The C3-525cw is designed with durability in mind, with a polypropylene cone that resists damage from moisture and UV exposure.

The C3-525-020810 is a versatile option that combines the qualities of both coaxial and component speakers. It is specially designed to integrate seamlessly into various systems while providing excellent sound quality. Its shallow mounting depth allows for installation in tighter spaces without sacrificing audio performance.

Finally, the standard C3-525 offers a balanced sound profile suitable for a wide range of music genres. Equipped with JL Audio's signature technologies and materials, it ensures a robust performance with extended frequency response and minimal distortion.

Together, these models showcase JL Audio's commitment to innovative design and exceptional sound. Each speaker in the C3 series combines the latest audio technologies with meticulous engineering, promising an immersive listening experience that appeals to every music lover. Whether you are upgrading your audio system or building a new one, investing in JL Audio's C3 series will elevate your in-car or home audio experience to new heights.