UHT16 Handheld Microphone Transmitter

1.Install batteries by unscrewing the BATTERY COMPARTMENT COVER (28). counterclockwise and remove, exposing the BATTERY HOLDER (26). Insert two fresh AA ALKALINE BATTERIES (27), observing the correct polarity, and screw the cover back on to the microphone. Make sure the cover is screwed clockwise completely. Fresh alkaline batteries can last up to 10 hours in use, but in order to ensure optimum performance, it is recommended that you replace the batteries after every 7-8 hours of use.

2.Select Channel by turning the frequency rotary DIP switch (20) to one of the sixteen channels. The slot on the switch shaft should match a number or letter of the dial, which indicates the selected channel. This channel needs to be set to the same channel as the UDR16 Receiver. (IMPORTANT NOTE: The transmitter must be OFF when selecting a new channel. When selected, the transmitter will then be at the new selected channel when turned ON. If you attempt to change the channel when the transmitter is ON, it will not change until the unit is turned OFF and ON again. This step must be repeated each time you select a new channel.)

3.Turn on the UHT16 by sliding the AUDIO MUTE switch (21) to the OFF position first.

Then slide the power switch (22) to the ON position. The TX LED indicatoR (green)

(23) will stay on to indicate that the transmitter is on. The battery indicator. LED (red) (24) will stay OFF, indicating usable

battery strength. In the case of a dead	25
or low battery, the battery indicator.	26	27
LED (24) will either not go on at all or		27
LED (24) will either not go on at all or
will stay on continuously, indicating
that the batteries should be replaced with
fresh ones. To preserve battery life, turn		20
the transmitter off when not in use.		20
the transmitter off when not in use.	21
4. The microphone is now ready to use. The	21	22
A or B DIVERSITY LED INDICATOR (14) on the	28	24 23
UDR16 receiver should now be lit, indicating

a received signal from the transmitter. When ready to speak, slide the AUDIO switch (21).

totheONposition.(Note:ObservecareinselectingP.A.volume,transmitterlocation and speaker placement so that acoustic feedback (howling or screeching) will be avoided.) (Note: The windscreen of the UHT16 functions as a built-in antenna. For proper operation, never remove the windscreen during use, or exchange with another type. For optimum range, maintain line-of-sight between the transmitter and the receiver whenever possible. Holding the microphone tightly, bridging across the windscreen and mic tube, will also lessen range. Hold mic by mic tube housing only for optimum operation.)

5.For optimum performance, an INPUT LEVEL CONTROL (25) is provided. Adjust the gain by turning the control with a small screwdriver. It is recommended that the level be set at about 1/2 maximum. Experiment and set for maximum possible gain without audible distortion on the high level peaks. (Note: Turning down the gain too much can compromise the signal-to-noise ratio, and is not recommended.)

UDMS16BP, UDMS16HH specifications

The Bogen UDMS16HH and Bogen UDMS16BP are advanced digital messaging systems designed for a range of communication needs in various settings, from schools to commercial environments. Both models exhibit robust features and cutting-edge technologies that enhance their usability and performance in delivering clear audio messages.

One of the primary characteristics of the UDMS16HH is its high-capacity storage capability, allowing users to upload and store multiple messages for playback. With a memory that accommodates up to 16 minutes of audio, this system is perfect for institutions that require frequent announcements, such as schools or hospitals. The UDMS16BP, on the other hand, offers similar functionalities but is specifically designed for background music and messaging applications, featuring capabilities that cater to retail environments and dining establishments.

The user-friendly interface of both systems allows for straightforward programming and operation, whether you are dealing with pre-recorded messages or live announcements. Utilizing an easy to navigate keypad and LCD display, users can quickly access the functions they need, making it highly suitable for users with varied technical skill levels. The programmable timer function adds automation to message playing, ensuring that important announcements are made at predetermined times, reducing the workload on staff.

Another significant feature is the audio quality. Both models employ advanced audio processing technology, which ensures that messages are delivered with crystal-clear clarity, regardless of background noise. This makes them ideal for applications in areas requiring high intelligibility, such as classrooms and busy public spaces.

In terms of connectivity, the UDMS16HH and UDMS16BP are equipped with multiple inputs, allowing integration with existing sound systems and other audio sources. Users can easily connect external microphones or input devices, increasing the flexibility and functionality of the system.

The UDMS series also emphasizes durability and reliability. Built to withstand the demands of everyday use, these systems are equipped with protective casings and components designed for longevity. Additionally, they are expandable, enabling users to incorporate additional units or features as their needs evolve.

In summary, the Bogen UDMS16HH and UDMS16BP showcase a blend of advanced features, high-quality audio delivery, and user-friendly operation. They are essential tools for effective communication in various environments, ensuring that important messages are conveyed clearly and efficiently.