®
| XA2150 | |
Features |
| |
|
| |
The Jensen XA2150 power amplifier is a two- | • 150 watts RMS bridged into a 4 ohm load | |
channel | • Bridgeable design to direct full power to one | |
amplifier. The XA2150 includes: | speaker | |
• RCA inputs | Audio Amplifiers | |
• High level inputs | ||
| ||
• Continuously variable low pass or high | Amplification offers two advantages: | |
pass crossover | • The XA2150 amplifier can make the sound | |
• Bass boost feature | of your receiver fuller and richer, even at low | |
• Remote turn on/off | volume levels. | |
• Electronic protection circuitry to protect the | • Many automotive receivers provide four to | |
amplifier from short circuit, DC offset and | 10 watts at maximum power. At 75 watts | |
thermal overload | RMS per channel (200 watts bridged), the | |
• Unique, | XA2150 can be played substantially louder, | |
• 2 x 75 watts RMS per channel (2 x 150 | permitting the use of more powerful | |
speakers. | ||
watts peak) | ||
| ||
• Pass through connectors for adding other |
| |
amps |
| |
|
|
Installation
Before You Begin Installation
Before you begin, you will need tools, supplies and adapters. It is best to make sure you have everything you need before you start. There is a list of supplies and tools on the next page.
Amplifier Location
Disconnect Battery
Before you begin, always disconnect the battery negative terminal.
–
+
Important
Allow air circulation around the amplifier.
The XA2150 amplifier’s compact design allows greater flexibility in mounting. It can be mounted under a seat or in the trunk.
When selecting a location, remember that amplifiers generate heat. Select a location where air can circulate around the amplifier. Do not cover the XA2150 with carpets or enclose it behind interior trim panels. Do not mount the amplifier in an inverted or upside down configuration. Every installation will be a bit different based upon vehicle design. Check all locations and placements carefully before making any cuts or connections.
Important
If wiring connections are made wrong, the unit will not operate properly and it could be damaged. Follow the installation instructions carefully, or have the installation handled by an experienced technician.
Professional Tip
Amplifier Installation Kit
Your installation job will be much easier if you purchase an amplifier installation kit. These kits often include
2