| ||
I N C L U D E D H A R D W A R E |
|
|
20) | 1) 10’- 1/2” Flex Loom | |
8) | 1) | |
2) Port Bezel | 1) | |
1) | 2) | |
4) Nylon Locknuts | 1) | |
1) 3/8” Split Lock Washer | 1) 3/8” x | |
1) 3” x 3” Wax Square | 4) 1/4 x 1” Fender Washer | |
S P E C I F I C A T I O N S |
|
|
|
|
|
(Subwoofer)
Enclosure Type: Acoustic Suspension (sealed)
Driver Type: 8W1v2
Nominal Impedance: 4 Ohms
Continuous Power Handling: 150 Watts
P o w e r R e c o m m e n d a t i o n
Above is pictured the settings as we tested the Slampak® here, you may find that your settings differ slightly. All JL Audio amplifiers are very versatile audio components. Please consult the owner’s manual for even more detailed information about installing and tuning your amplifier.
C o n n e c t i o n s
A schematic of your Slampak® system is seen at the left, please use it as reference when testing or troubleshooting.
Using quality power, signal and speaker wire is essential in ensuring the performance of your Slampak®.
JL Audio Has chosen and tested the wire included in your Slampak® through very rigorous standards, it will provide the best performance for your system.
(954) |
| www.jlaudio.com |
|
|
| |
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered |
|
|
|
| ||
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc. |
|
|
|
| ||
|
|
|
| |||
#6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending. |
|
|
|
| ||
For more detailed information please visit us online at www.jlaudio.com. |
|
|
|
|
|
|
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y | • | M I R A M A R , F L O R I D A | • | 3 3 0 2 5 | • | U S A |
Page 6• JL Audio, Inc 2009