Installation G u i d e, Hour | JL Audio SLPK-CAN-SPYDER1 instruction

SLPK-CAN-SPYDER1_INSTR_SKU# 011312

SlamPak

I n s t a l l a t i o n G u i d e

for the

SLPK-CAN-SPYDER1

SKU#94491& 94490

If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox® be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems:

1)The sub-bass performance will suffer due to the movement of the enclosure caused by the force exerted by the woofer(s).

2)A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.

INSTALLATION D I F F I C U LT Y :

3OUT OF

Estimated TIME:

1 HOUR

Thank you for choosing a JL Audio Slampak® for your motorcycle sound system. With proper

installation, your new vehicle-specific enclosed sound system will deliver years of listening pleasure.

We strongly recommend that you have your new Slampak® installed by your authorized JL Audio dealer. The installation professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely

before beginning the process.

S T E P 1

Empty out the front storage space of the motorcycle so that you have a clean area to work in.

If you are only installing the pods, skip to STEP 16.

S T E P 2

Remove the bottom panel above the rear tire as show here

S T E P 3

Lift the seat, remove the panel that simulates a gas tank at the top center of the motorcycle. Remove the two panels labelled “can-am” (one on each side of the motorcycle) and the two panels labelled “spyder” (one on each side of the motorcycle).

Continued on Next Page