5) CEILING MOUNT ADAPTOR (SADT-100CM)

This adaptor is used for installing the indoor housing or the outdoor housing for the Combi Dome Camera to a concrete ceiling.

6)POLE MOUNT ADAPTOR (SADT-100PM)

This adaptor is used for installing the WALL MOUNT ADPATOR (SBR-100WM) to a pole that is over 7 cm (2.76 in.) in diameter.

2-7

Installing the Camera

1.[Figure 1] Install the structure on the ceiling.

(Refer to Installation reference for the Length of the structure)

*Built in by the builder of the structure

E

[Figure 1]

 

Length of

 

ceiling Hole

2. Make a hole in the ceiling where the camera will be installed.

(The hole should be about

ø180)

3.[Figure 2] Assemble the BRKT-ANCHOR on the ceiling and screw the 4 bolts in.

[Figure 2]

4.[Figure 3,4] Connect the various cables to the CAMERA ADAPTER. (See page 2-4)

[Figure 3]

[Figure 4]

2-8