Samsung ED2250S/P manual Preparing the Cables, Cable Connection, Power Adapter Cable, Video Cable

Preparing the Cables

To install and use the ED2250S/P, the following cables should be

prepared.

Power Adapter Cable

The cable that plugs into the ED2250S/P power input receptacle has the rated voltage of 24VAC, 1.5A.

Check the rated voltage before using the cable.

Video Cable

The ED2250S/P's cable is a BNC Cable for connecting the video-output

terminal to the video-input terminal of the monitor.

2-3

Cable Connection

1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT)

2. Then, connect the other end of the connector to the Video Input Terminal of the monitor.

3.Now connect the Power Adapter Cable. Use a driver to screw

one part of the two lines of Power Adapter to Power Input Terminal of the ED2250S/P.

4.Adjust the switch below the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector.

5.Connect the Remote Control

Terminal of the ED2250S/P and the external Controller.

Controller

Adapter BOARD

2-4

E