S T E P 4
Remove the strap that secured the Jack to the locating foam, this will be
S T E P 5
Remove the spare tire and turn it over. Put the jack inside the wheel and, expand it so that the pressure from the jack holds it in place.
S T E P 6
Use the strap that was removed in STEP 4 to secure the jack to the spare wheel.
S T E P 7
Align the jack so that the bolt that secures the spare can be
S T E P 8
S T E P 9
Remove the trunk liner fastening plug, this will be replaced by one of
*CAUTION*
Before drilling, always make sure that you are not going to be drilling into any gas lines, brake lines, transmission lines, electrical wiring, exhaust systems or anything else that might cause a reduction in your weekly pay. Always wear eye protection when drilling.
S T E P 1 0
Insert the
S T E P 1 1
The anchor point for the cargo net needs to be removed for the installation of the Stealthbox®.
Page 2 • JL Audio, Inc 2008 | Continued on Next Page |