S T E P 4
Remove the cup holders from center console by pulling upwards.
S T E P 5
With the cup holders removed, look through the opening and disconnect the exposed wiring harness plug.
S T E P 6
Pull the wiring harness off the tab.
S T E P 7
*Read Step 7 & Step 8 before attempting the removal of the rear face plate.*
Carefully pry up and back on the two black tabs on either side of the console’s door hinge.
Extra care should be used in a effort to prevent breaking these tabs.
S T E P 8
Pry the rear face to the rear of the vehicle.
S T E P 9
Remove all plugs from the rear face plate.
S T E P 1 0
From the back side of the center console, fold down the cup holders.
Remove two screws behind the cup holders as well as the three screws securing the cup holder to the center console.
Remove the back panel from the center console.
S T E P 1 1
Remove the wiring harness that is secured to the driver’s side of the center console.
Page 2 • JL Audio, Inc 2006 | Continued on Next Page |