JL Audio SB-F-ESCP/10W1v2 N G R a T U L a T I O N S, C L U D E D H a R D W a R E, Specification S

Page 3

VIEWED FROM ABOVE LOOKING DOWN

S T E P 1 0 D E T A I L ( 2 )

SB-F-ESCP/10W1V2 INSTR_SKU# 011286

I N C L U D E D H A R D W A R E

VEHICLE SHEET METAL

FLAT WASHER SPLIT LOCK WASHER

HEX NUT

MOUNTING BRACKET

1” SPACER

INTERIOR PANEL

SPLIT LOCK WASHER

ALLEN HEAD STUD

HEX NUT

FLAT WASHER

This is how the hardware should be configured for the bracket and, the Stealthbox®.

2)

1/4-20 x 1 1/4” Hex Head Bolt

2)

1/4-20 Hex Hed Nut

2)

1/4” Split Lock Washer

2)

1/4” Flat Washer

1) 3/8” Split Lock Washer

1) 3/8” Flat Washer

1) 3/8-16 x 2 1/4” Allen Head Stud

1)

1” Spacer

1) Custom Mount bracket

 

 

HEX HEAD BOLT

VEHICLE SHEET METAL

STEALTHBOX WALL

 

S T E P 1 1

Expand the round hole in the interior panel from STEP 4 as shown, re-install all of the the interior panels that were removed earlier, place the 1” Spacer (included) over the Stud as shown.

S T E P 1 2

Put the box in the panel and line it up with the bolt. Make sure to run speaker wire from the enclosure to the location of the amp before securing it to the vehicle.

S T E P 1 3

Mount woofer to the box . place grill over the speaker, secure the woofer and you are done.

C O N G R A T U L A T I O N S !

You have completed the installation for this model!

Enjoy your new Stealthbox®!

Please refer to the Power Recommendation section for an amplifier recommendation and basic set-up help.

S P E C I F I C A T I O N S

Enclosure Type: Acoustic Suspension (sealed)

Driver Type: 10w1v2-4

Nominal Impedance: 4 ohms

Continuous Power Handling: 300watts

P o w e r R e c o m m e n d a t i o n

JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2.

The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1v2 when being used to power your Stealthbox®.

The JL Audio 250/1v2 is a very versatile audio component. Please consult the owner’s manual for even more detailed information about installing and tuning this amplifier.

M I D / H I G H F r e q u e n c y D r i v e r F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 5”x 7” / 6”x 8”- Front Doors

Fits JL Audio Models: TR570-CXi, C5-570, C5-570x & ZR570-CSi

Rear Speaker Size / Location: 5”x 7” / 6”x 8”- Rear Door

Fits JL Audio Models: TR570-CXi, C5-570x

(954) 443-1100

 

www.jlaudio.com

 

 

 

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

 

 

 

 

trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

 

 

 

 

JLA-SKU# 011286 01-22-2009 • Printed in USA • ©2008 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479

 

 

 

 

#6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending.

 

 

 

 

For more detailed information please visit us online at www.jlaudio.com.

 

 

 

 

 

 

1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y

M I R A M A R , F L O R I D A

3 3 0 2 5

U S A

Page 5• JL Audio, Inc 2008

Image 3
Contents Hours Installation G u i d eSB-F-ESCP/10W1v2 Estimated TimeE P 1 W e r R e c o m m e n d a t i o n Specification SN G R a T U L a T I O N S C L U D E D H a R D W a R E