Cont From Previous | JL Audio SB-GM-CLRDO/10W3v3/DG2 specification

Cont.

From

Page

➔

CAUTION
Before drilling, make sure that you are not going to be
drilling into any gas lines, brake lines, transmission lines,
electrical wiring, transfer case(4x4 vehicles) or anything	➔
else that might cause a reduction in your weekly pay.
Always wear eye protection when drilling.
With the use of a 1/2” drill bit and drill. Drill out the
floor at the impression on the wax square.
After the hole is drilled, remove the wax square

➔STEALTHBOX WALL

FENDER WASHER

FLAT WASHER

LOCK WASHER

HEX NUT

THREADED INSERT

VEHICLE SHEET METAL

SOCKET CUP SET SCREW

STEP 7: (A) Thread the supplied socket cup screw into the Stealthbox. Leave 1/2” exposed.

(B)Place the Stealthbox into position and line up the curved corners of the Stealthbox, that are between the woofer and the square shape of the Stealthbox.These corners need to line up with the curvature of the transmission hump floor as it goes to the rear and jets to the right and left of the truck. Once into place, push down with force.

(C)With a 1/2” drill bit, drill at the impression that was left by the Stealthbox in STEP6.

STEP 8: With the drilled out hole in the floor. Expose the socket cup set screw 2” out of the Stealthbox. Place the Stealthbox into position and guide the socket cup set screw through the drilled hole.

From under the vehicle, place the supplied fender washer, flat washer, lock washer and hex nut onto the socket cup screw.

➔

STEP 9: Place the jack back into the holder and then place the jack assembly to the floor(same area it was removed from) with the yellow knob facing the passenger’s side rear door. With one factory mounting bolt. Secure the assembly with to the dri- ver’s side mounting threads. Use the second factory mounting bolt to plug up the passenger’s side mounting threads.

w w w . j l a u d i o . c o m	SB - GM - CLDRO/10W3v3, JL AUDIO, Inc 2006

STEP10: With a second person, place the rear seat back into position. Wrap the shoulder belt in front of the seat and through bottom crease of the seat.

Continued on Next Page ➔

Pag e 2

Sheet SKU#011189 Revision 3/8/2006

SB-GM-CLRDO/10W3v3, SB-GM-CLRDO/10W3v3/TN2, SB-GM-CLRDO/10W3v3/TN, SB-GM-CLRDO/10W3v3/GA, SB-GM-CLRDO/10W3v3/DG2 specifications

The JL Audio SB-GM-CLRDO/10W3v3 series offers a premium audio upgrade for Chevrolet and GMC trucks, specifically designed to provide superior bass performance without compromising the vehicle's interior space and aesthetics. This series is tailored to seamlessly blend with the factory environment while delivering an impressive audio experience that audiophiles can appreciate.

At the heart of the SB-GM-CLRDO/10W3v3 is the 10W3v3 subwoofer, renowned for its exceptional sound quality and impressive power handling capabilities. The subwoofer features a 10-inch design, which allows it to produce deep, powerful bass notes that elevate any music genre. With a dual 2-ohm voice coil configuration, it not only provides flexibility in installation but also maximizes power efficiency, ensuring that users get the best performance from their amplifiers.

One of the standout features of the SB-GM-CLRDO series is its enclosure. Constructed from high-grade MDF, the enclosure is precision-tuned to optimize the performance of the 10W3v3 subwoofer. This ensures that the subwoofer operates at peak efficiency, delivering maximum output without distortion. The enclosure is also designed to fit perfectly under the rear seat of compatible Chevy Silverado and GMC Sierra models, making it an ideal solution for those who wish to maintain cargo space.

The series includes several variations, such as the SB-GM-CLRDO/10W3v3/DG and its counterparts like the SB-GM-CLRDO/10W3v3/DG2, SB-GM-CLRDO/10W3v3/GA, and SB-GM-CLRDO/10W3v3/TN. These variations differ primarily in aesthetics and finish options, allowing users to select an enclosure that best complements their vehicle's interior. Each version maintains the same high-quality construction and performance standards synonymous with JL Audio products.

From a technology standpoint, the SB-GM-CLRDO series incorporates advanced features like an integrated wire management system, which simplifies installation and enhances the overall look. Additionally, the subwoofer is designed for optimal thermal dissipation, ensuring long-lasting performance even during extended use. The combination of impressive build quality, innovative design, and powerful audio output makes the JL Audio SB-GM-CLRDO/10W3v3 series an excellent investment for anyone looking to upgrade their truck's audio system.

In summary, the JL Audio SB-GM-CLRDO/10W3v3 series epitomizes high-performance sound engineering, offering a combination of flexibility, power, and aesthetic appeal. This series caters to those who demand the best in bass performance while staying true to the factory look of their vehicle, thus enhancing the overall driving experience.