JL Audio SB-GM-CLRDO/10W3v3/GA manual Wax Square, Fender Washer, Flat Washer, Lock Washer, Hex Nut

Page 3

Cont.

From

Previous

Page

CONGRATULATIONS!

INSTALL COMPLETE.

STEP 11: With the shoulder belt through the bot-

STEP 12: Flip the rear seat back into the up-right

Included Hardware:

tom crease. Snap the belt back into the latch.

position.

(1) Wax Square

 

 

(1)

2-14”Socket Cup Set Screw

 

 

(1)

Fender Washer

 

 

(1)

Flat Washer

 

 

(1)

Lock Washer

 

 

(1)

Hex Nut

Difficulty Of Installation:

Specifications:

Enclosure Type: Sealed

Driver Type: 10W3v3-4

Nominal Impedance: 4Ω

Cont. Power Handling: 300Watts

JL Audio recommends using a high quality amplifier such as the JL Audio 250/1. The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1 when being used to power your Stealthbox®.

+12VDC Ground Remote

Preamp Output Section

Bass Control

Amp LP Filter

Amplifier Input Section

 

Output Mode

Infrasonic Filter

Mode/Slope

Input Voltage

Input Sens. Signal Sensing

 

Full-Range/Low-Pass/High-Pass

 

Off/30Hz

Off/12dB/24dB

Low/High

Off/On

 

 

 

+7

 

 

 

 

 

+3

+10

 

 

 

JL AUDIO 250/1

 

+1

+13

 

 

 

 

 

 

 

 

 

monoblock subwoofer amplifier

 

 

 

 

 

 

Mid/High Frequency Driver Information:

 

Front Location Driver Size:

 

6.5” separates

XR650-CSi

Applicable JL Audio Products: VR, XR,VR & TR 650-CSi *with 1/2” spacer

Rear Location Driver Size: 6.5”

Applicable JL Audio Products:

XR,VR & TR 650-CXi

*with 1.0” spacer

VR650-CXi

 

Left Ch.

Right Ch.

LF Boost (dB) Filter Freq. (Hz)

Left Ch.

Right Ch.

The JL Audio 250/1 is a very versatile audio component. Please consult the owner’s manual for detailed information about installing and tuning this amplifier.

10369 N. Commerce Pkwy, Miramar, Florida 33025-392

Phone: 954.443.1100 Fax: 954.443.1111

w w w . j l a u d i o . c o m

SB - GM - CLDRO/10W3v3, JL AUDIO, Inc 2006

Pag e 3

Sheet SKU#011189 Revision 3/8/2006

Image 3
Contents On Next Also remove the jack out of the metal holderCont From Previous Lock Washer Wax SquareFender Washer Flat Washer

SB-GM-CLRDO/10W3v3, SB-GM-CLRDO/10W3v3/TN2, SB-GM-CLRDO/10W3v3/TN, SB-GM-CLRDO/10W3v3/GA, SB-GM-CLRDO/10W3v3/DG2 specifications

The JL Audio SB-GM-CLRDO/10W3v3 series offers a premium audio upgrade for Chevrolet and GMC trucks, specifically designed to provide superior bass performance without compromising the vehicle's interior space and aesthetics. This series is tailored to seamlessly blend with the factory environment while delivering an impressive audio experience that audiophiles can appreciate.

At the heart of the SB-GM-CLRDO/10W3v3 is the 10W3v3 subwoofer, renowned for its exceptional sound quality and impressive power handling capabilities. The subwoofer features a 10-inch design, which allows it to produce deep, powerful bass notes that elevate any music genre. With a dual 2-ohm voice coil configuration, it not only provides flexibility in installation but also maximizes power efficiency, ensuring that users get the best performance from their amplifiers.

One of the standout features of the SB-GM-CLRDO series is its enclosure. Constructed from high-grade MDF, the enclosure is precision-tuned to optimize the performance of the 10W3v3 subwoofer. This ensures that the subwoofer operates at peak efficiency, delivering maximum output without distortion. The enclosure is also designed to fit perfectly under the rear seat of compatible Chevy Silverado and GMC Sierra models, making it an ideal solution for those who wish to maintain cargo space.

The series includes several variations, such as the SB-GM-CLRDO/10W3v3/DG and its counterparts like the SB-GM-CLRDO/10W3v3/DG2, SB-GM-CLRDO/10W3v3/GA, and SB-GM-CLRDO/10W3v3/TN. These variations differ primarily in aesthetics and finish options, allowing users to select an enclosure that best complements their vehicle's interior. Each version maintains the same high-quality construction and performance standards synonymous with JL Audio products.

From a technology standpoint, the SB-GM-CLRDO series incorporates advanced features like an integrated wire management system, which simplifies installation and enhances the overall look. Additionally, the subwoofer is designed for optimal thermal dissipation, ensuring long-lasting performance even during extended use. The combination of impressive build quality, innovative design, and powerful audio output makes the JL Audio SB-GM-CLRDO/10W3v3 series an excellent investment for anyone looking to upgrade their truck's audio system.

In summary, the JL Audio SB-GM-CLRDO/10W3v3 series epitomizes high-performance sound engineering, offering a combination of flexibility, power, and aesthetic appeal. This series caters to those who demand the best in bass performance while staying true to the factory look of their vehicle, thus enhancing the overall driving experience.