JBL GT4.0c, GT6.0c, GT5.0c owner manual Installation Warnings and Tips

Page 11

Lo-Pass

Electronic

Hi-Pass

Crossover

 

 

Amp for

 

Amp for

Woofers

 

Tweeters

f < 5khz

 

f > 5khz

Left

 

Right

 

GTC

+

 

 

Midwoofers

 

 

 

 

GTC04

 

 

Tweeters

 

Left

Right

Channel

GTC04 and GTC Midwoofer Connected Channel

 

Directly to Amplifier

 

Figure 9

Installation Warnings and Tips

Be careful not to cut or drill into fuel tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when work- ing on your vehicle. Inspect behind panels before you cut or drill.

Make sure that the midwoofer will physically fit in the mount- ing location. If door mounting, check for adequate clearance with the window in both rolled-up and rolled-down positions as well as for interference with window crank and power window mecha- nism. If mounting elsewhere, check for clearance around rear deck torsion bars, glove box or other structural elements.

Do not mount speakers where water may splash on the cones.

• Make sure that it will be easy to

run connecting wires to the 11 speakers. Trace speaker wire

paths before you undertake mounting.

Always disconnect the ground wire from the battery before doing any work on the vehicle.

CAUTION: Fuel tanks are located directly beneath the rear deck in some cars. Check for adequate speaker basket clear- ance before considering this location!

Image 11
Contents Automotive Component Systems Autosound at Its Best Important Paperwork Tweeter InstallationComponent System Parts Grille mounting IN-LINE Crossover Tweeter Output LevelTwo-Screw Mounting Configuration Front View Mounting the GT6.0c woofer Component Placement GTC04 System DesignInstallation Warnings and Tips Handling Specifications To Obtain Warranty Service Page Declaration of Conformity