JBL GT6.0c, GT5.0c, GT4.0c Component System Parts, Important Paperwork, Tweeter Installation

Page 3

Component System Parts

Your new Component System consists of the GTC04 neodymium magnet tweeter and either a 4",

5-1/4", or 6-1/2" midwoofer. Both the GTC04 and the midwoofer have high-quality passive crossover parts already built into them. Figure 2 is an illustration of the proper wiring procedure of the Component System.

Important Paperwork

Before proceeding, be sure to put the sales receipt from your JBL Component System purchase in a safe place. It is necessary to vali- date your Limited Warranty. Having access to the receipt is also valuable for insurance pur- poses and when it comes time to resell your vehicle.

Tweeter Installation

The GTC04 has been supplied with both Angle and Flush mounting brackets. Figures 1 and 2 show the proper way to flush- and angle-mount the GTC04. The mounting hole diameter for the flush-mount frame is 1-3/4".

Figure 1

03

 

ANGLE MOUNT

2

1

1Line up tab with slot on bracket

2Push tweeter into bracket and turn clockwise

Image 3 JBL GT6.0c, GT5.0c, GT4.0c owner manual Component System Parts, Important Paperwork, Tweeter Installation
Contents Automotive Component Systems Autosound at Its Best Tweeter Installation Component System PartsImportant Paperwork Grille mounting IN-LINE Crossover Tweeter Output LevelTwo-Screw Mounting Configuration Front View Mounting the GT6.0c woofer Component Placement GTC04 System DesignInstallation Warnings and Tips Handling Specifications To Obtain Warranty Service Page Declaration of Conformity