Lanzar Car Audio VBD300 owner manual HOW to Remove and Install the Front Panel Optional

Page 4

HOW TO REMOVE AND INSTALL THE FRONT PANEL (OPTIONAL)

1.Press the release button and pull-off the front panel. Keep front panel into the case.

2.To install the front panel, insert the panel into the housing and make sure the panel is properly installed, otherwise, abnormalities occurs on the display or some keys will not function properly.

REMOVING THE FRONT PANEL

Front Panel

Release Button

INSTALLING THE FRONT PANEL

Image 4

Contents VBD Installation DIN FRONT/REAR-MOUNTDIN REAR-MOUNT Method B Installing the Front Panel HOW to Remove and Install the Front Panel OptionalRemoving the Front Panel Wiring Connection For 4 X 25W or 4 X 40W SystemLocation and Function of Controls ON/OFFDisc Play MuteSelect Listening Mode MONO/STEREO for MON Version onlySUB-WOOFER for SUB.W. Version only LoudnessPreset Stations Liquid Crystal Display14 & 15 Select Stations 14 & 15 Fast Forward and Fast ReverseReset Button Function Automatically Storing & Program ScanningFaceplate Release EqualizationRemote Control Handset Control & Function Keys Specification For 3 Bands For 2 Bands EuropeTrouble Shooting Symptom Cause Solution