(23) AUTOMATICALLY STORING & PROGRAM SCANNING
Automatically Storing
Press and hold AMS button (23) for several seconds to toggle automatically storing function. It starts searching next frequency in local mode and stores the clear station into the preset memory. If 6 ch. is not fully memorised, it would start the second searching in distance mode. At the end of automatically storing operation, mode is changed to Preset Scan.
Preset Scanning
Press AMS button (23) shortly to toggle preset scanning function. During the scanning, it will stop at every stored station for several seconds and the number of the channel being scanned flashes on the display. Press it again to stop scanning.
(24)FACEPLATE RELEASE
Press RELEASE button (24) to detach the removable faceplate.
(25)EQUALIZATION
Press EQ button (25) to turn on equalization function and to select desired audio mode. There are four kinds of mode as below:
FLAT 
ROCK 
CLASSIC 
POP 
(26)REMOTE SENSOR (OPTIONAL)
Point the remote handset to control the remote sensor (26).
Press the function keys on the remote handset to control the system.
(27)RESET BUTTON FUNCTION
RESET button (27) is placed on the housing and must be activated with either a ball point pen or thin metal object. The reset button is to be activated for the following reasons:
•Initial installation of the unit when all wiring is completed.
•All the function buttons do not operate.
•Error symbol on the display.
Note: If press RESET button (27), the unit can’t work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
9