Lanzar Car Audio VBD500 owner manual CD Operation

Page 10

CD OPERATION

SELECT TRACKS

Press MAN/SEK button (17) or (18) to move to the previous track or the following track. Track number shows on display.

Hold MAN/SEK button (17) or (18) to fast reverse or fast forward. CD play starts from when you release the button.

STOP PLAYING

Press PAU button (21) to pause CD player. Press it again to resume play.

REPEAT THE SAME TRACK

Press RPT button (23) to continuously repeat the same track. Press again to stop repeat.

PREVIEW ALL TRACKS

Press SCN button (22) to play first several seconds of each track on the current disc. Press again to stop intro and listen to track.

PLAY ALL TRACKS IN RANDOM

Press SHF button (24) to play all tracks on CD in random order. Press again to cancel the function.

EJECT

Press EJECT button (4) to stop CD play and eject the disc from the slot.

NOTE ON CD-R/CD-RW DISCS

On this unit, in addition to an audio CD, you can play your original CD-R or CD-RW that contain audio titles.

However, depending on the conditions of the recording equipment or the CD-R/CD-RW disc itself, some CD-Rs or CD-RWs cannot be played on this unit.

DO NOT stick paper or tape, etc. onto the label side or the recording side of any CD-R/CD-RW, as it may cause a malfunction.

10

Image 10
Contents VBD Installation DIN FRONT/REAR-MOUNTDIN REAR-MOUNT Method B Using the Detachable Front Panel To Detach the Front PanelTo Reinstall the Front Panel Wiring Connection Main UnitON/OFF OperationGeneral Operation Faceplate ReleaseReset Sound AdjustmentSelect Mode LoudnessRadio Operation CD Operation Remote Control Handset Control & Function Keys CD Player SpecificationGeneral RadioTrouble Shooting Symptom Cause SolutionPage Page 88-C0660-22