Kicker Ultimate Guide to the ZX 700.5 Amplifier Performance and Installation
Page 2

 

 

ZX.5-SERIES AMPLIFIERS Owner’s Manual

MODEL:

ZX700.5

Authorized KICKER Dealer:

 

 

 

Purchase Date:

 

 

Model Number:

 

 

 

 

 

 

Serial Number:

 

 

 

 

 

 

PERFORMANCE

 

 

RMS Power:

 

 

AMP1 & AMP2 channels driven

 

 

@ 14.4V, 4Ω stereo, ≤ 1% THD+N

70W x 4

@ 14.4V, 2Ω stereo, ≤ 1% THD+N

85W x 4

@ 14.4V, 4Ω mono, ≤ 1% THD+N

165W x 2

RMS Power:

 

 

SUBWOOFER channel driven

 

 

@ 14.4V, 4Ω mono, ≤ 1% THD+N

210W x 1

@ 14.4V, 2Ω mono, ≤ 1% THD+N

420W x 1

Length

20” (507mm)

Specifications:

 

 

Height

2-1/8” (54mm)

Width

9-5/8” (244mm)

Frequency Response ± 1dB

25Hz–20kHz

Signal-to-noise Ratio

>95dB, A-weighted, re: rated power

Input Sensitivity

Low Level: 125mV–5V

 

 

High Level: 250mV–10V

Selectable Electronic Crossover

Variable HI or OFF (bypass) 50–200Hz, 12dB/octave

 

 

Variable low-pass 50–200Hz, 24dB/octave (SUB)

Bass Boost

Variable 0–18dB @ 40Hz

Subsonic Filter

24dB/octave, fi xed at 25Hz

Pro Tip: To get the best performance from your new KICKER Amplifi er, use genuine KICKER accessories and wiring.

INSTALLATION

Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er.

Wiring: Disconnect the vehicle’s battery to avoid an electrical short. Then, connect the ground wire to the amplifi er. Make the ground wire short, 24” (60cm) or less, and connect it to a paint-and-corrosion-free, solid, metal area of the vehicle’s chassis. Adding an additional ground wire of this same gauge (or larger) between the battery’s negative post and the vehicle chassis is recommended.

2

ZX AMPLIFIERS

2011 ZX 700.5 RevB.indd 2

10/12/2010 10:41:52 AM

Page 1 Page 3
Image 2
Page 1 Page 3
Contents ZX Amplifier Model InstallationRMS Power Performance≤18 ≤24Slide the housing until it snaps Into the metal bracket ZXRC* Remote Bass InstallationSignal Woofer Zxrc not included Conductor phone cableOperation Troubleshooting A. Only EE.UU. solamente Nur USA Les USA Seulement ZX700.5 Rendimiento Amplificador DE LA Serie ZX.5Modelo InstalaciónKicker Conexión a tierra o blindajeSeñal de entrada Woofer Funcionamiento POR Cuatro Canales CON SubwooferZXRC* Control Remoto DE Bajos Instalación Zxrc no incluido Cable de teléfono de 4 conductoresFuncionamiento Resolución DE Problemas ZX700.5 Leistung Verstärker DER ZX.5 SerieModell RMS-LeistungOder Vierkanalbetrieb MIT Subwoofer ZXRC* BASSPEGEL- Fernbedienung InstallationSignaleingang Tieftöner BefestigenBetrieb Problembehebung ZX700.5 Puissance Efficace MODÈLEZX700.5Performances SpécificationsMise sous tension à distance ÂmeMasse ou blindage BatterieFonctionnement À Quatre Canaux Avec Caisson DE Graves ZXRC* Télécommande DU Niveau DES Graves InstallationEntrée du signal Woofer MétalliqueUtilisation EN CAS DE Difficulté 2011 ZX 700.5 RevB.indd 10/12/2010 104201 AM Electronics Limited Warranty Box 459 Stillwater, Oklahoma 74076 USA 405 11ZX.5-B-20101012International Warranty Box 459 Stillwater, Oklahoma 74076 USA 405Stillwater Designs
Related manuals
Manual 4 pages 57.21 Kb

ZX700.5 specifications

The Kicker ZX700.5 and ZX550.3 are exceptional car amplifiers designed for audio enthusiasts seeking powerful sound performance and reliability. Both models are engineered to enhance your in-car audio experience with high-quality components and innovative technologies that ensure crystal-clear sound reproduction and robust power delivery.

The Kicker ZX700.5 is a versatile 5-channel amplifier that delivers a maximum power output of 700 watts. This amplifier is perfect for those looking to power multiple speakers and a subwoofer in their vehicle. The unique construction of the ZX700.5 ensures that it can efficiently drive the speakers while providing deep, thunderous bass. It features variable low-pass and high-pass crossovers for tailored frequency response, along with a remote bass boost control that allows you to adjust the bass levels from your driver's seat. The Kicker ZX700.5 is also equipped with short circuit protection, thermal overload protection, and a rugged heatsink design to ensure the amplifier remains cool during extended use.

On the other hand, the Kicker ZX550.3 is a 3-channel amplifier that produces an impressive 550 watts of power. This amplifier is ideal for those who want to drive three channels typically configured for front and rear speakers along with a subwoofer. The ZX550.3 includes an integrated crossover with adjustable low-pass and high-pass filters, which allows for precise control of the audio output. Its compact design makes it easy to fit in tight spaces, while also ensuring high-performance audio delivery. The ZX550.3 also comes with the same protective features that Kicker is known for, ensuring long-lasting reliability.

Both the ZX700.5 and ZX550.3 utilize Kicker's proprietary technology, which includes circuitry designed to minimize distortion and improve sound quality. They are compatible with a wide range of speaker configurations and can be easily integrated into existing audio systems. The amplifiers feature a sleek, durable chassis that not only looks great but also provides excellent cooling for optimal performance.

In conclusion, the Kicker ZX700.5 and ZX550.3 are standout amplifiers that offer high-quality audio performance, advanced technology, and reliable construction. Whether you’re looking to enhance your factory audio system or build a custom setup, these amplifiers deliver the power and clarity needed for an immersive listening experience on the road.
Top Page Image Contents